MDD071C-N-060-N2S-095GR2
MDD Synchronous Motors
The Bosch Rexroth Indramat MDD071C-N-060-N2S-095GR2 from the MDD Synchronous Motors series is a high-precision digital AC servo motor designed for digital drive controllers. This permanent-magnet motor features a motor size of 071 with a motor length code C and a centering diameter of 95 mm, delivering a continuous torque at standstill of 6.6 Nm. Equipped with a Digital servo feedback (DSF) system for commutation and rotor position control, it operates at a nominal speed of 6000 min⁻¹. The unit includes a plain shaft with shaft seal and offers a blocking brake with a torque of 6.5 Nm. Standard balancing and housing and right connector ensure ease of installation, while the standard shaft end configuration supports reliable operation in demanding industrial environments.
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
6.5 Nm
Centering Diameter
95 mm
Housing
Standard
Motor feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
6.6 Nm
Motor Length Code
C
Motor Size
071
Nominal Speed
6000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
Plain shaft
Connection Direction
Right
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
How does the centering interface on the MDD071C-N-060-N2S-095GR2 affect rigid frame integration?
It uses a 95 mm centering diameter that ensures repeatable axial alignment. This helps reduce mounting stress and preserves shaft concentricity in high-precision assemblies.
Can this motor sustain axis stability when left in hold during idle dwell states?
It delivers 6.6 Nm continuous torque at standstill without external cooling. That enables reliable static force in clamping or slow-cycle axis control systems.
How does the MDD071C-N-060-N2S-095GR2 perform in high-speed feedback-driven automation?
The motor uses digital servo feedback (DSF) to maintain real-time velocity and position control. This improves motion response under dynamic torque and speed transitions.
Will the MDD071C-N-060-N2S-095GR2 hold position safely during a vertical-axis emergency stop?
It includes a blocking brake rated at 6.5 Nm that locks the shaft securely. This prevents positional loss and ensures safe load retention during shutdown events.
How does the plain shaft on product code MDD071C-N-060-N2S-095GR2 affect torque transmission in low-backlash coupling?
The plain shaft allows tight-fit integration with pulleys or rigid couplings. It reduces backlash and improves stability under reversing loads.
Common Misspellings
MDD-071C-N-060-N2S-095GR2
MDD071C N 060 N2S 095GR2
MDD071C-N-060-N2S-095-GR2
MDD071CN060N2S095GR2
MDD71C-N-060-N2S-095GR2
MDDO71C-N-060-N2S-095GR2
MDDO71C-N-O6O-N2S-O95GR2
Internal Product Review
The model MDD071C-N-060-N2S-095GR2 is a Bosch Rexroth Indramat synchronous motor built with a 95 mm centering diameter. It offers 6.6 Nm torque at standstill and a 6.5 Nm holding brake. It ensures stability with its plain shaft design. Its DSF system enables precise control and seamless performance.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD071C-N-060-N2S-095GR2.
Want to 
