MDD071C-N-060-N2S-095PA2
MDD Synchronous Motors
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
6.5 Nm
Centering Diameter
95 mm
Housing
Standard
Motor feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
6.6 Nm
Motor Length Code
C
Motor Size
071
Nominal Speed
6000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
keyway
Connection Direction
Side A
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
What ensures accurate alignment of the motor during precision coupling with the driven element?
A 95 mm centering diameter ensures tight axial fit during installation. This reduces eccentric load paths and minimizes imbalance in high-speed assemblies.
How does the Bosch Rexroth Indramat MDD071C-N-060-N2S-095PA2 maintain control accuracy during rapid feedback cycles?
It uses digital servo feedback (DSF) to deliver precise positional updates during continuous motion. This ensures tight feedback loops for high-performance axis regulation.
What factors make the MDD071C-N-060-N2S-095PA2 suitable for vertically-mounted or suspended-load axes?
It includes a holding brake rated at 6.5 Nm, which locks the shaft securely during power-off states. This prevents drift or uncontrolled motion under static load.
In closed cabinet configurations, how does connector placement affect integration with existing layouts?
The connector is located on Side A, which supports clean lateral wiring in tight enclosures. It reduces cross-interference with adjacent control components.
How is shaft and bearing protection handled in high-particulate or sealed environments?
A built-in shaft seal enhances internal protection against dust and fluid intrusion. This increases motor longevity in contaminated or enclosed settings.
Common Misspellings
MDD-071C-N-060-N2S-095PA2
MDD071C N 060 N2S 095PA2
MDD071C-N-060-N2S-095-PA2
MDD071CN060N2S095PA2
MDD71C-N-060-N2S-095PA2
MDDO71C-N-060-N2S-095PA2
MDDO71C-N-O6O-N2S-O95PA2
mdd071c-n-060-n2s-095pa2
Internal Product Review
The MDD071C-N-060-N2S-095PA2 from Bosch Rexroth Indramat is a size 071 synchronous motor offering a 6.6 Nm standstill torque. It supports speeds up to 6000 min⁻¹, includes a 6.5 Nm holding brake, and comes with a sealed Side A connector. Its digital servo feedback ensures sharp, responsive control.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD071C-N-060-N2S-095PA2.
Want to 
