MDD071C-N-060-N2S-095PB2
MDD Synchronous Motors
Technical Specifications
Balancing
Standard
Centering Diameter
95 mm
Connection Direction
Side B
Connection Type
Connector
Continuous Torque at Standstill
6.6 Nm
Holding Brake
With blocking brake
Holding Brake Torque
6.5 Nm
Housing
Standard
Motor feedback
Digital servo feedback (DSF)
Motor Length Code
C
Motor Size
071
Nominal Speed
6000 min⁻¹
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Shaft Seal
With shaft seal
Shaft Type
keyway
Frequently Asked Questions
For drives requiring steady-state force, how does current draw affect thermal design considerations?
The motor draws 22.1 A continuously at standstill, reflecting its sustained torque capability. This must be factored into thermal management for enclosure and drive sizing.
How does the Bosch Rexroth Indramat MDD071C-N-060-N2S-095PB2 maintain output stability during fast, high-rpm load cycles?
It runs at a nominal speed of 6000 min⁻¹, enabling consistent output in speed-critical systems. This supports dynamic acceleration with low speed deviation under load.
What protection class advantages does this motor offer when deployed in dusty or wet production zones?
It meets IP65 protection standards, fully sealing internal components against dust and low-pressure water jets. This allows reliable operation in harsh, contaminant-prone environments.
In torque-controlled applications, how efficiently does this model translate electrical input into mechanical output?
It features a torque constant of 0.30 Nm/A, enabling precise torque generation from low current ranges. This ensures predictable performance in controlled-load systems.
How well does the MDD071C-N-060-N2S-095PB2 manage load-holding during vertical or safety-critical axis halts?
Its holding brake offers 6.5 Nm torque to secure the rotor under static load. This provides reliable shaft locking in emergency stop or standby conditions.
Common Misspellings
MDD-071C-N-060-N2S-095PB2
MDD071C N 060 N2S 095PB2
MDD071C-N-060-N2S-095-PB2
MDD071CN060N2S095PB2
MDD71C-N-060-N2S-095PB2
MDDO71C-N-060-N2S-095PB2
MDDO71C-N-O6O-N2S-O95PB2
mdd071c-n-060-n2s-095pb2
Internal Product Review
The MDD071C-N-060-N2S-095PB2 is a servo motor from Bosch Rexroth Indramat with digital feedback. It runs at 6000 min⁻¹, offers 6.5 Nm holding brake torque, 95 mm centering diameter, and features IP65 protection. Its F class insulation ensures safe, heat-resistant operation under demanding loads.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD071C-N-060-N2S-095PB2.
Want to 
