MDD071C-N-060-N2T-095GL2
MDD Synchronous Motors
The MDD071C-N-060-N2T-095GL2 is a motor for digital drive controllers from Bosch Rexroth Indramat’s MDD Synchronous Motors series. It offers 6.6 Nm continuous torque at standstill and a 6.5 Nm holding brake torque with blocking brake, featuring standard balancing. The plain shaft unit (size 071, centering diameter 95 mm) includes shaft seal, left-side connector, standard housing, integrated multiturn absolute encoder with digital servo feedback (DSF), and no side B shaft end.
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
6.5 Nm
Centering Diameter
95 mm
Housing
Standard
Encoder
Integrated multiturn absolute encoder
Motor feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
6.6 Nm
Motor Length Code
C
Motor Size
071
Nominal Speed
6000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
Plain shaft
Connection Direction
Left
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
How does the MDD071C-N-060-N2T-095GL2 manage encoder feedback during control system restarts?
The integrated multiturn absolute encoder with digital servo feedback preserves shaft position across power cycles. It ensures deterministic startup behavior in automated control environments.
Will the left-side connector on the MDD071C-N-060-N2T-095GL2 restrict cable layout options in dense machine frames?
The connector’s fixed left-side orientation simplifies some assemblies but restricts routing flexibility on the right. Designers must allow for lateral space when positioning drives.
How does the MDD071C-N-060-N2T-095GL2 maintain load stability when powered down in vertical-axis designs?
The blocking brake provides 6.5 Nm holding torque to secure the motor at rest. It prevents drift in z-axis applications during idle or e-stop conditions.
Can the plain shaft of the MDD071C-N-060-N2T-095GL2 handle precision-driven assemblies without introducing backlash?
The smooth shaft works well with zero-backlash couplings in positioning systems. Its geometry supports high-resolution servo loops in rigid mechanical stacks.
How does the MDD071C-N-060-N2T-095GL2 housing respond to thermal buildup in high-cycling automation lines?
The standard housing dissipates heat efficiently in closed-loop motion tasks. It's engineered to support moderate-duty servo cycles with minimal derating.
Common Misspellings
MDD-071C-N-060-N2T-095GL2
MDD071C N 060 N2T 095GL2
MDD071C-N-060-N2T-095-GL2
MDD071CN060N2T095GL2
MDD71C-N-060-N2T-095GL2
MDDO71C-N-060-N2T-095GL2
MDDO71C-N-O6O-N2T-O95GL2
Internal Product Review
The MDD071C-N-060-N2T-095GL2 is a synchronous motor built for digital drive controllers by Bosch Rexroth. It is housed in a standard casing with a left-side connector. It delivers 6.6 Nm standstill torque and 6.5 Nm holding brake torque, supported by a plain shaft with shaft seal. Its multiturn absolute encoder ensures continuous, precise positional tracking.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD071C-N-060-N2T-095GL2.
Want to 
