MDD090A-N-020-N2L-110GR2
MDD Synchronous Motors
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
11.0 Nm
Centering Diameter
110 mm
Housing
Standard
Motor Feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
3.7 Nm
Motor Length Code
A
Motor Size
090
Nominal Speed
2000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
Plain shaft
Connection Direction
Right
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
What benefits does the 21.9 A maximum current offer in high-load applications?
The 21.9 A maximum current rating enables the motor to handle high power demands, making it suitable for heavy-duty applications where consistent torque and reliable performance are required under large load conditions.
How does the MDD090A-N-020-N2L-110GR2 motor’s continuous torque of 3.7 Nm affect its load-bearing capability?
The 3.7 Nm continuous torque allows the motor to handle medium-load applications consistently, providing sufficient power output for most tasks but potentially requiring a higher torque motor for heavier or dynamic loads.
What impact does the 2000 min⁻¹ nominal speed have on precision control systems?
The 2000 min⁻¹ nominal speed is ideal for moderate precision control systems, offering a good balance between speed and torque, but might not be ideal for systems requiring ultra-high-speed performance.
How would the windings inductance of 27.7 mH affect high-frequency operations?
The 27.7 mH windings inductance introduces some delay in the motor’s response to high-frequency signals, which could reduce performance in applications requiring rapid speed or torque adjustments.
What advantages does a connector-type connection provide in terms of system integration?
The connector-type connection simplifies the installation process by allowing for quick disconnection and reconnection, making it easier to replace or repair the motor without the need for complex rewiring.
Common Misspellings
MDD-090A-N-020-N2L-110GR2
MDD090A N 020 N2L 110GR2
MDD090A-N-020-N2L-110-GR2
MDD090AN020N2L110GR2
MDD90A-N-020-N2L-110GR2
MDDO90A-N-020-N2L-110GR2
MDDO9OA-N-O2O-N2L-11OGR2
Internal Product Review
The MDD090A-N-020-N2L-110GR2 motor by Rexroth Indramat includes a shaft seal and operates at a nominal speed of 2000 min⁻¹. It provides a continuous torque of 3.7 Nm at standstill and a theoretical maximum torque of 19.0 Nm, making it suitable for various high-performance applications.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD090A-N-020-N2L-110GR2.
Want to 
