MDD090A-N-020-N2L-130GA2
MDD Synchronous Motors
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
11.0 Nm
Centering Diameter
130 mm
Housing
Standard
Motor Feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
3.7 Nm
Motor Length Code
A
Motor Size
090
Nominal Speed
2000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
Plain shaft
Connection Direction
Side A
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
What does the motor's 6.5 Nm holding brake torque provide in terms of safety?
The 6.5 Nm holding brake torque ensures secure stopping, which is crucial for preventing unexpected movement or mechanical failure in systems that require accurate load holding during operation.
How does the 45-minute thermal time constant impact motor behavior under sustained loads?
A 45-minute thermal time constant allows the motor to adapt to prolonged loads, ensuring that the motor’s temperature stabilizes over time, preventing overheating during long-term or high-duty cycle operations.
What influence does the 4.0 (5.4) A continuous current have on system energy consumption?
The continuous current of 4.0 (5.4) A offers an energy-efficient operation, especially in systems where current draw is steady over time. However, careful thermal management is needed to minimize heat buildup.
How does the MDD090A-N-020-N2L-130GA2 motor’s 0.93 Nm/A torque constant impact load handling during operations?
The 0.93 Nm/A torque constant ensures that the motor produces a predictable amount of torque for each unit of current. This helps to maintain stable load handling and precise control in torque-sensitive applications.
What considerations should be made when using a motor with a 6.84 Ohm windings resistance?
A 6.84 Ohm windings resistance requires attention to thermal management, as it generates resistive heat. Effective cooling systems should be employed to prevent the motor from overheating and to improve energy efficiency.
Common Misspellings
MDD-090A-N-020-N2L-130GA2
MDD090A N 020 N2L 130GA2
MDD090A-N-020-N2L-130-GA2
MDD090AN020N2L130GA2
MDD90A-N-020-N2L-130GA2
MDDO90A-N-020-N2L-130GA2
MDDO9OA-N-O2O-N2L-13OGA2
Internal Product Review
The MDD090A-N-020-N2L-130GA2 motor by Bosch Rexroth operates with a thermal time constant of 45 minutes and a continuous torque of 3.7 Nm at standstill. It features a motor size of 090 and is ideal for high-performance applications requiring efficient power handling.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD090A-N-020-N2L-130GA2.
Want to 
