MDD090A-N-030-N2M-110PB1
MDD Synchronous Motors
The MDD090A-N-030-N2M-110PB1 from Bosch Rexroth Indramat offers standard housing and an integrated multiturn encoder. Part of the MDD Synchronous Motors series, it provides 3.7 Nm standstill torque and 6.5 Nm brake torque. It uses digital servo feedback and features a keyway shaft.
With a 110 mm centering diameter and 3000 min⁻¹ nominal speed, it has standard balancing. The motor size is 090. It is made for digital drive controllers.
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
6.5 Nm
Centering Diameter
110 mm
Housing
Standard
Encoder
Integrated multiturn absolute encoder
Motor feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
3.7 Nm
Motor Length Code
A
Motor Size
090
Nominal Speed
3000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
keyway
Connection Direction
Side B
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
Is there a holding brake in this motor?
Yes. The holding brake is able to produce a torque of 6.5 newtons during operation.
How is this motor cooled?
The cooling of the MDD090A-N-030-N2M-110PB1 occurs through a combination of natural convection and thermal radiation.
Are connection cables included in the delivery package of this motor?
No. The MDD090A-N-030-N2M-110PB1 is not delivered together with cables. However, these cables can be ordered as individual accessories.
What type of magnet is used in this motor?
The MDD090A-N-030-N2M-110PB1 is a permanent magnet excited device. The integrated magnet are made from iron oxide material.
What is the protection classification of this motor?
The MDD090A-N-030-N2M-110PB1 is an IP65 product. It is able to maintain optimum operation in harsh conditions.
Common Misspellings
MDD-090A-N-030-N2M-110PB1
MDD090A N 030 N2M 110PB1
MDD090A-N-030-N2M-110-PB1
MDD090AN030N2M110PB1
MDD90A-N-030-N2M-110PB1
MDDO90A-N-030-N2M-110PB1
MDDO9OA-N-O3O-N2M-11OPB1
mdd090a-n-030-n2m-110pb1
Internal Product Review
The MDD090A-N-030-N2M-110PB1 is a low inertial motor built by Bosch Rexroth. This motor has a thermal time constant of 45 minutes, its maximum current requirement is about 32.2 amperes, it also has a theoretical maximum torque of 17.7 newton meters.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD090A-N-030-N2M-110PB1.
Want to 
