MDD090A-N-040-N2L-110GL2
MDD Synchronous Motors
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
11.0 Nm
Centering Diameter
110 mm
Housing
Standard
Motor Feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
3.7 Nm
Motor Length Code
A
Motor Size
090
Nominal Speed
4000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
Plain shaft
Connection Direction
Left
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
What is the maximum permissible installation elevation for this motor?
Installation elevation of the MDD090A-N-040-N2L-110GL2 should not exceed 1000 meters.
Is the long term storage of this motor allowed?
Yes. The MDD090A-N-040-N2L-110GL2 can be stored for as long as possible, storage temperatures should be between -20 to 80 degrees.
What type of magnet is built into this motor?
The MDD090A-N-040-N2L-110GL2 features permanent magnets made from rare-earth material. This magnet is responsible for the low inertial level of the motor.
How much torque does the MDD090A-N-040-N2L-110GL2 produce during operation?
The continuous torque of the MDD090A-N-040-N2L-110GL2 during standstill operation is about 5.0 newton meters.
How can maximum torque be achieved in this motor?
The achievable maximum torque depends on the type of drive used with the motor. More Information about this is provided in the documentation.
Common Misspellings
MDD-090A-N-040-N2L-110GL2
MDD090A N 040 N2L 110GL2
MDD090A-N-040-N2L-110-GL2
MDD090AN040N2L110GL2
MDD90A-N-040-N2L-110GL2
MDDO90A-N-040-N2L-110GL2
MDDO9OA-N-O4O-N2L-11OGL2
Internal Product Review
The MDD090A-N-040-N2L-110GL2 is a long lasting IP65 synchronous motor. The motor is equipped with a digital servo feedback and a plain encoder. It can also be used in harsh conditions without problem.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD090A-N-040-N2L-110GL2.
Want to 
