MDD090A-N-040-N2M-110GA0
MDD Synchronous Motors
The Bosch Rexroth Indramat MDD090A-N-040-N2M-110GA0 is a high-precision motor for digital drive controllers from the MDD Synchronous Motors series. It features a plain shaft with a 110 mm centering diameter and a with shaft seal design, ensuring robust performance. The motor delivers 3.7 Nm continuous torque at standstill and operates at a nominal speed of 4000 min⁻¹, with an integrated multiturn absolute encoder and digital servo feedback (DSF) for accurate position control. With standard housing and balancing, and supplied without blocking brake on the shaft end, this unit connects via a side A connector, embodying Bosch Rexroth Indramat quality.
Technical Specifications
Balancing
Standard
Holding Brake
Without blocking brake
Centering Diameter
110 mm
Housing
Standard
Encoder
Integrated multiturn absolute encoder
Motor feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
3.7 Nm
Motor Length Code
A
Motor Size
090
Nominal Speed
4000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
Plain shaft
Connection Direction
Side A
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
Is the MDD090A-N-040-N2M-110GA0 covered by a coating?
There is a prime black coating covering the housing of the motor. The coat is resistant to weathering, yellowing, diluted acids, and lye.
Does the MDD090A-N-040-N2M-110GA0 come with a fan?
Yes. There is an air blower attached to the motor. It regulates the temperature of the motor by surface cooling.
This motor features a standard housing design. It is cooled by natural convection and surface cooling.
The power connection of this product include the power cable, connecting cable for blocking brake, and the connection cable for temperature sensor.
What type of feedback is installed inside this product?
The MDD090A-N-040-N2M-110GA0 features digital servo feedback with integrated multiturn absolute encoder.
Is the shaft of the MDD090A-N-040-N2M-110GA0 equipped with a keyway?
The motor features a plain shaft without keyway. This shaft is able to support relatively high loads.
Common Misspellings
MDD-090A-N-040-N2M-110GA0
MDD090A N 040 N2M 110GA0
MDD090A-N-040-N2M-110-GA0
MDD090A-N-040-N2M-110-GAO
MDD090A-N-040-N2M-110GAO
MDD090AN040N2M110GA0
MDD90A-N-040-N2M-110GA0
MDDO90A-N-040-N2M-110GA0
MDDO9OA-N-O4O-N2M-11OGAO
Internal Product Review
The MDD090A-N-040-N2M-110GA0 synchronous motor contains magnets made from special rare-earth material. These magnets helps it to operate at a low inertial. The motor can also reach nominal speeds of about 4000 revolutions per minute.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD090A-N-040-N2M-110GA0.
Want to 
