MDD090A-N-040-N2M-110GB2
MDD Synchronous Motors
The Bosch Rexroth Indramat MDD090A-N-040-N2M-110GB2 from the MDD Synchronous Motors series is a robust digital AC servo motor designed for precision digital drive controllers. This permanent-magnet motor features a housing with a Motor Length Code A and a Centering Diameter of 110 mm, delivering a continuous torque at standstill of 3.7 Nm and an impressive Holding Brake Torque of 11.0 Nm thanks to its integrated blocking brake. It operates at a nominal speed of 4000 min⁻¹ and incorporates digital servo feedback (DSF) with an integrated multiturn absolute encoder for accurate rotor position and speed control. The motor’s plain shaft design, complete with shaft seal and standard shaft end, ensures reliable mechanical performance, while the side-B connector enhances installation flexibility. Standard balancing and housing design guarantee smooth operation under demanding industrial conditions.
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
11.0 Nm
Centering Diameter
110 mm
Housing
Standard
Encoder
Integrated multiturn absolute encoder
Motor feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
3.7 Nm
Motor Length Code
A
Motor Size
090
Nominal Speed
4000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
Plain shaft
Connection Direction
Side B
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
Does the MDD090A-N-040-N2M-110GB2 operate with any brush?
No. The MDD090A-N-040-N2M-110GB2 is a brushless device renowned for its maintenance free operation.
What type of bearings are in the MDD090A-N-040-N2M-110GB2?
The MDD090A-N-040-N2M-110GB2 is equipped with a life-time lubricated ball bearings that support loads connected to its shaft.
How does this motor prevent overload damage?
A temperature sensor is built into the winding of this product. This sensor detects high temperature levels and communicates it to the controller.
What is the best installation position for this motor?
The MDD090A-N-040-N2M-110GB2 can be mounted directly within the working area of machines and in harsh environmental conditions.
How should pinions be connected to this product?
Pinions and belt pulleys should be directly attached to the motor shaft. This design makes the support of high radial loads possible.
Common Misspellings
MDD-090A-N-040-N2M-110GB2
MDD090A N 040 N2M 110GB2
MDD090A-N-040-N2M-110-GB2
MDD090AN040N2M110GB2
MDD90A-N-040-N2M-110GB2
MDDO90A-N-040-N2M-110GB2
MDDO9OA-N-O4O-N2M-11OGB2
Internal Product Review
The MDD090A-N-040-N2M-110GB2 synchronous motor operates with a digital servo feedback with multi-turn absolute encoder. The motor operates at a nominal speed of 4000 revolutions per minute. Its total weight is about 12.5 kilograms.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD090A-N-040-N2M-110GB2.
Want to 
