MDD090A-N-040-N2M-110GR2
MDD Synchronous Motors
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
11.0 Nm
Centering Diameter
110 mm
Housing
Standard
Encoder
Integrated multiturn absolute encoder
Motor feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
3.7 Nm
Motor Length Code
A
Motor Size
090
Nominal Speed
4000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
Plain shaft
Connection Direction
Right
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
Can this motor withstand extreme vibration levels?
Despite its IP65 protection, the operation of this motor in extreme vibration conditions should be avoided.
What type of maintenance operation is best for this motor?
The MDD090A-N-040-N2M-110GR2 is a maintenance free device.
Is the MDD090A-N-040-N2M-110GR2 delivered with connection cables?
No. These cables are however available and can be easily ordered by the operator.
What material is used for the packaging of the MDD090A-N-040-N2M-110GR2?
The packaging material for this motor is a recyclable cardboard box.
Can this motor be recycled?
Yes. This motor contains a high metal content that can be easily recycled after its service life is exhausted.
Common Misspellings
MDD-090A-N-040-N2M-110GR2
MDD090A N 040 N2M 110GR2
MDD090A-N-040-N2M-110-GR2
MDD090AN040N2M110GR2
MDD90A-N-040-N2M-110GR2
MDDO90A-N-040-N2M-110GR2
MDDO9OA-N-O4O-N2M-11OGR2
Internal Product Review
The MDD090A-N-040-N2M-110GR2 synchronous motor is a low-inertial device that operates at a typical speed of about 4000 revolutions per minute. This motor has a centering diameter of 110 millimeters, it is also equipped with a plain output shaft.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD090A-N-040-N2M-110GR2.
Want to 
