MDD090A-N-040-N2M-110PL2
MDD Synchronous Motors
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
11.0 Nm
Centering Diameter
110 mm
Housing
Standard
Encoder
Integrated multiturn absolute encoder
Motor feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
3.7 Nm
Motor Length Code
A
Motor Size
090
Nominal Speed
4000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
keyway
Connection Direction
Left
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
What is the standard operation speed for this motor?
During normal operation, this motor operates at a nominal speed of about 4000 revolutions per minute.
Is the MDD090A-N-040-N2M-110PL2 with an air blower?
No. heat produced in this motor is transferred to its housing where it is dissipated.
What type of feedback is in the MDD090A-N-040-N2M-110PL2?
The MDD090A-N-040-N2M-110PL2 comes with a digital feedback with integrated multi-turn absolute encoder.
What is the holding torque of the holding brake in this product?
The typical holding torque for this integrated holding brake is about 11 newton meters
What is the peak installation height for this motor?
For best performance, this motor should not be used at an height that exceed 1000 meters above sea level.
Common Misspellings
MDD-090A-N-040-N2M-110PL2
MDD090A N 040 N2M 110PL2
MDD090A-N-040-N2M-110-PL2
MDD090AN040N2M110PL2
MDD90A-N-040-N2M-110PL2
MDDO90A-N-040-N2M-110PL2
MDDO9OA-N-O4O-N2M-11OPL2
Internal Product Review
The MDD090A-N-040-N2M-110PL2 is a state-of-the-art synchronous motor unit designed to operate in combination with a compatible Indramat encoder and maintain intelligent operation. The motor operates at a nominal speed of about 4000 revolutions per minute.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD090A-N-040-N2M-110PL2.
Want to 
