MDD090A-N-040-N2M-130GA1
MDD Synchronous Motors
The MDD090A-N-040-N2M-130GA1 from Bosch Rexroth Indramat features a motor length code A and a centering diameter of 130 mm. As part of the MDD Synchronous Motors series, this motor delivers a nominal speed of 4000 min-1 and continuous torque at standstill of 3.7 Nm.
It features integrated multiturn absolute encoder feedback for precise commutation and speed control. The motor also includes a blocking brake with 6.5 Nm torque and uses a plain shaft.
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
6.5 Nm
Centering Diameter
130 mm
Housing
Standard
Encoder
Integrated multiturn absolute encoder
Motor feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
3.7 Nm
Motor Length Code
A
Motor Size
090
Nominal Speed
4000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
Plain shaft
Connection Direction
Side A
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
Can belt-pulleys be directly attached to this motor?
Yes. The shaft of the MDD090A-N-040-N2M-130GA1 is designed to support the direct attachment of pinions and belt pulleys.
What mounting orientation is recommended for this product?
The MDD090A-N-040-N2M-130GA1 can be installed and mounted in any orientation.
How is the MDD090A-N-040-N2M-130GA1 packaged for delivery?
The delivery package of this product is a recyclable cardboard box. Each package carries a type label for easy identification.
Is the MDD090A-N-040-N2M-130GA1 equipped with a holding brake?
Yes. There is a holding brake built into this motor.
Can this motor be used in cold areas?
The minimum temperature for the MDD090A-N-040-N2M-130GA1 motor is about 0 degrees Celsius.
Common Misspellings
MDD-090A-N-040-N2M-130GA1
MDD090A N 040 N2M 130GA1
MDD090A-N-040-N2M-130-GA1
MDD090AN040N2M130GA1
MDD90A-N-040-N2M-130GA1
MDDO90A-N-040-N2M-130GA1
MDDO9OA-N-O4O-N2M-13OGA1
Internal Product Review
The MDD090A-N-040-N2M-130GA1 is a unique motor manufactured according IP65 design. It is a self cooled device that prevents overheating through natural convection and thermal radiation. The motor operates at a nominal speed of 4000 revolutions per minute, it is also easy to install in any position.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD090A-N-040-N2M-130GA1.
Want to 
