MDD090A-N-040-N2M-130PA2
MDD Synchronous Motors
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
11.0 Nm
Centering Diameter
130 mm
Housing
Standard
Encoder
Integrated multiturn absolute encoder
Motor feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
3.7 Nm
Motor Length Code
A
Motor Size
090
Nominal Speed
4000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
keyway
Connection Direction
Side A
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
What type of feedback is used in this motor?
The MDD090A-N-040-N2M-130PA2 operates with a digital servo feedback with integrated multiturn absolute encoder.
Is the motor shaft with a keyway?
No. The MDD090A-N-040-N2M-130PA2 motor is delivered with a plain shaft that is able to support high loads.
What is the holding torque of the holding brake built into this motor?
The built-in holding brake has a typical holding torque of about 11 newton meters.
Is this motor air cooled?
Yes. Heat is eliminated directly from the housing of the motor through natural convection and thermal radiation.
Are connection cables delivered with this motor?
Electrical cables are not delivered with the motor. They are however ready made and can be ordered separately from Bosch Rexroth Indramat.
Common Misspellings
MDD-090A-N-040-N2M-130PA2
MDD090A N 040 N2M 130PA2
MDD090A-N-040-N2M-130-PA2
MDD090AN040N2M130PA2
MDD90A-N-040-N2M-130PA2
MDDO90A-N-040-N2M-130PA2
MDDO9OA-N-O4O-N2M-13OPA2
Internal Product Review
The MDD090A-N-040-N2M-130PA2 low inertial motor is one of Bosch Rexroth most durable and easily installed products. It is a air cooled device that operates at a nominal speed of 4000 revolutions per minute. The output shaft of this motor comes with a keyway for smooth shaft-hub connection.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD090A-N-040-N2M-130PA2.
Want to 
