MDD090A-N-040-N2M-130PL2
MDD Synchronous Motors
The MDD090A-N-040-N2M-130PL2 from Bosch Rexroth Indramat features Motor Size 090 and Continuous Torque at Standstill of 3.7 Nm. Part of the MDD Synchronous Motors series, it runs at 4000 min⁻¹ and has an integrated multiturn absolute encoder. This standard housing motor includes a blocking brake with 11 Nm holding torque.
It offers digital servo feedback (DSF) and a shaft seal for durability. The centering diameter is 130 mm and the shaft is keyway type. A left-direction connector eases installation with digital drive controllers.
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
11.0 Nm
Centering Diameter
130 mm
Housing
Standard
Encoder
Integrated multiturn absolute encoder
Motor feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
3.7 Nm
Motor Length Code
A
Motor Size
090
Nominal Speed
4000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
keyway
Connection Direction
Left
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Output Shaft
Shaft With Keyway Per DIN 6885 sh. 1, 8-68 Edition
Frequently Asked Questions
What is the holding torque produced by the holding brake in this motor?
The integrated holding brake produces a holding torque of about 11 newton meters.
Is the MDD090A-N-040-N2M-130PL2 able to function in cold areas?
The minimum ambient temperature for the operation of this product is about 0 degrees Celsius.
What type of protection does the enclosure of this motor provide?
The MDD090A-N-040-N2M-130PL2 is a IP65 device. It is resistant to dust and water splashes.
What type of protection does the coating of this product provide?
The prime black coating protects this unit against dust, yellowing, weathering, and dilute acids.
Can the MDD090A-N-040-N2M-130PL2 be used in area with high humidity?
Relative humidity levels around this motor should be maintained below 95 percent.
Common Misspellings
MDD-090A-N-040-N2M-130PL2
MDD090A N 040 N2M 130PL2
MDD090A-N-040-N2M-130-PL2
MDD090AN040N2M130PL2
MDD90A-N-040-N2M-130PL2
MDDO90A-N-040-N2M-130PL2
MDDO9OA-N-O4O-N2M-13OPL2
Internal Product Review
The MDD090A-N-040-N2M-130PL2 is a low inertial motor built by Bosch Rexroth Indramat according to international standards. This motor is an air cooled product that meets the IP65 design. Its nominal speed of 4000 revolutions per minute, it also comes with a thermistor that provides information about its winding temperature status.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD090A-N-040-N2M-130PL2.
Want to 
