MDD090B-N-020-N2L-110GB2
MDD Synchronous Motors
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
11.0 Nm
Centering Diameter
110 mm
Housing
Standard
Motor Feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
7.2 Nm
Motor Length Code
B
Motor Size
090
Nominal Speed
2000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
Plain shaft
Connection Direction
Side B
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
Does the MDD090B-N-020-N2L-110GB2 come with a holding brake?
Yes. The integrated holding brake produces a torque of about 11 newton meters.
Does the MDD090B-N-020-N2L-110GB2 require installation inside a control cabinet?
This motor is an IP65 device. It does not require a control cabinet, and can be mounted into any position in the servo system.
Can the holding brake in the MDD090B-N-020-N2L-110GB2 be used as a service brake?
No. The holding brake is not a service brake, it wears down after approximately 20,000 revolutions against the closed brake.
What type of controller should be used with this product?
Operators are recommended to operate this motor with controller from Bosch Rexroth Indramat.
How does the MDD090B-N-020-N2L-110GB2 prevent overheating?
There is a thermistor installed inside the winding of this motor. The thermistor serves as a reliable temperature sensor that detects high temperature levels.
Common Misspellings
MDD-090B-N-020-N2L-110GB2
MDD090B N 020 N2L 110GB2
MDD090B-N-020-N2L-110-GB2
MDD090BN020N2L110GB2
MDD90B-N-020-N2L-110GB2
MDDO90B-N-020-N2L-110GB2
MDDO9OB-N-O2O-N2L-11OGB2
Internal Product Review
The MDD090B-N-020-N2L-110GB2 is a reliable servo motor built by Bosch Rexroth. It is a permanent magnet excited device that maintains a low operation inertial and can be used in harsh conditions due to its IP65 housing.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD090B-N-020-N2L-110GB2.
Want to 
