MDD090B-N-040-N2M-130GR1
MDD Synchronous Motors
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
6.5 Nm
Centering Diameter
130 mm
Housing
Standard
Encoder
Integrated multiturn absolute encoder
Motor feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
7.2 Nm
Motor Length Code
B
Motor Size
090
Nominal Speed
4000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
Plain shaft
Connection Direction
Right
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
Why is a 6.5 Nm blocking brake useful on the MDD090B-N-040-N2M-130GR1?
The brake holds load position at rest or during E-stop without relying on drive torque. It is valuable on vertical Z-axes, indexing tables and conveyors where back-driving must be prevented.
What is the purpose of the 130 mm centering diameter on the MDD090B-N-040-N2M-130GR1?
The register simplifies concentric alignment with gearboxes or machine plates for reducing runout. Its consistent centering improves coupling life and motion smoothness.
How do the plain shaft and shaft seal choices impact integration for product code MDD090B-N-040-N2M-130GR1?
The plain shaft offers broad coupling options (clamp, key, or shrink devices) while the seal limits ingress. It reliable duty in dusty converting or packaging lines.
What does “standard balancing” mean here, and why does it matter for MDD090B-N-040-N2M-130GR1?
The standard rotor balancing reduces vibration at speed without special couplings. Its lower mechanical vibration helps the drive maintain higher control gains and smoother surface finishes.
How does the MDD090B-N-040-N2M-130GR1 connect with Bosch Rexroth digital drives and why is that useful?
Its connector orientation and DSF feedback enable plug-and-work with Rexroth digital controllers to streamline wiring and start-up. Its unified feedback and drive tooling speeds diagnostics and reduce changeover time.
Common Misspellings
MDD-090B-N-040-N2M-130GR1
MDD090B N 040 N2M 130GR1
MDD090B-N-040-N2M-130-GR1
MDD090BN040N2M130GR1
MDD90B-N-040-N2M-130GR1
MDDO90B-N-040-N2M-130GR1
MDDO9OB-N-O4O-N2M-13OGR1
Internal Product Review
The Indramat’s MDD090B-N-040-N2M-130GR1 servo motor combines a multiturn absolute encoder with DSF feedback for precise positioning. It has a 6.5 Nm brake and a 130 mm register. Its rated stationary torque stands at 7.2 Nm and its rotational speed is specified as 4000 min⁻¹. This motor comes with a plain-shaft and sealed design that integrates with digital drive controllers, while its standard balancing aids smooth integration.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD090B-N-040-N2M-130GR1.
Want to 
