MDD090B-N-040-N2M-130PR2
MDD Synchronous Motors
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
11.0 Nm
Centering Diameter
130 mm
Housing
Standard
Encoder
Integrated multiturn absolute encoder
Motor feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
7.2 Nm
Motor Length Code
B
Motor Size
090
Nominal Speed
4000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
keyway
Connection Direction
Right
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
What encoder is used on the MDD090B-N-040-N2M-130PR2, and why?
It uses an integrated multiturn absolute encoder to report absolute position over multiple revolutions to avoid homing after power cycles. It improves start-up precision and synchronizes axes quickly in coordinated motion.
How is the 11.0 Nm blocking brake on MDD090B-N-040-N2M-130PR2 used in vertical axes?
The holding brake supplies 11.0 Nm to secure the load during power-off or emergency stops. It prevents drift on Z-axes or conveyors during maintenance and provides safer state retention.
What is the benefit of a keyway shaft on MDD090B-N-040-N2M-130PR2?
The keyed shaft ensures positive mechanical engagement with hubs or pulleys for resisting slip under dynamic torque. It’s useful for start/stop cycles and reversing loads common in packaging and handling.
How does the right-side connector orientation help cabinet and cable layouts for MDD090B-N-040-N2M-130PR2?
A fixed right-exit connector simplifies routing parallel to machine frames to lower bend stress and installation time. It also helps segregate power and feedback harnesses for EMI management.
Is MDD090B-N-040-N2M-130PR2 compatible with Bosch Rexroth digital drive controllers?
Yes, the MDD motors are designed for digital drive controllers (e.g., DDS/DKS/DDC families), with motor parameters and feedback integration supported for streamlined commissioning. Its pairing enables single-axis positioning modules and automatic parameter sets.
Common Misspellings
MDD-090B-N-040-N2M-130PR2
MDD090B N 040 N2M 130PR2
MDD090B-N-040-N2M-130-PR2
MDD090BN040N2M130PR2
MDD90B-N-040-N2M-130PR2
MDDO90B-N-040-N2M-130PR2
MDDO9OB-N-O4O-N2M-13OPR2
Internal Product Review
The MDD090B-N-040-N2M-130PR2 synchronous servo motor is engineered to offer 7.2 Nm of standstill torque and it features a 11.0 Nm brake torque. Its turning speed is measured as 4000 min⁻¹ and it depends on its integrated multiturn encoder, along with DSF for feedback. A 130 mm centering diameter, keyed shaft and right-side connector simplify its integration with industrial systems.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD090B-N-040-N2M-130PR2.
Want to 
