MDD090C-N-020-N2M-130GR1
MDD Synchronous Motors
The Bosch Rexroth Indramat MDD090C-N-020-N2M-130GR1 is a motor for digital drive controllers in the MDD Synchronous Motors series, featuring an integrated multiturn absolute encoder, digital servo feedback (DSF), 10.4 Nm continuous torque at standstill, 6.5 Nm holding brake torque, and a 130 mm centering diameter.
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
6.5 Nm
Centering Diameter
130 mm
Housing
Standard
Encoder
Integrated multiturn absolute encoder
Motor feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
10.4 Nm
Motor Length Code
C
Motor Size
090
Nominal Speed
2000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
Plain shaft
Connection Direction
Right
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
How does standard rotor balancing affect high-speed motion consistency?
The standard balancing minimizes vibration across the operational speed range. This ensures smooth performance and improves bearing life in dynamic servo environments.
How does the MDD090C-N-020-N2M-130GR1 ensure load holding during vertical stops or controlled shutdowns?
It features a holding brake rated at 6.5 Nm torque. This secures shaft position when powered down, supporting safety and stability in gravity-sensitive axes.
Can the MDD090C-N-020-N2M-130GR1 sustain torque under prolonged stationary load in automation systems?
It delivers 10.4 Nm continuous torque at standstill. This enables reliable load holding during dwell phases without exceeding thermal capacity.
How does this motor maintain shaft reference without homing in precision control loops?
An integrated multiturn absolute encoder tracks position over power cycles. This supports continuous position accuracy without requiring external referencing routines.
What mechanical interface allows precise mounting into aligned drive trains or gear couplings?
It uses a 130 mm centering diameter to ensure concentric shaft alignment. This reduces vibration and supports accurate engagement with mechanical interfaces.
Common Misspellings
MDD-090C-N-020-N2M-130GR1
MDD090C N 020 N2M 130GR1
MDD090C-N-020-N2M-130-GR1
MDD090CN020N2M130GR1
MDD90C-N-020-N2M-130GR1
MDDO90C-N-020-N2M-130GR1
MDDO9OC-N-O2O-N2M-13OGR1
Internal Product Review
The MDD090C-N-020-N2M-130GR1 servo motor from Bosch Rexroth Indramat delivers a continuous standstill torque of 10.4 Nm. This motor features digital servo feedback, a 6.5 Nm holding brake torque, and a 130 mm centering diameter. An integrated multiturn absolute encoder provides accurate position tracking.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD090C-N-020-N2M-130GR1.
Want to 
