MDD090C-N-030-N2L-110PL0
MDD Synchronous Motors
Technical Specifications
Balancing
Standard
Holding Brake
Without blocking brake
Centering Diameter
110 mm
Housing
Standard
Motor Feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
10.4 Nm
Motor Length Code
C
Motor Size
090
Nominal Speed
3000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
keyway
Connection Direction
Left
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
For Bosch Rexroth Indramat MDD090C-N-030-N2L-110PL0 specifically, what performance planning details should engineers note?
Plan around ~10.4 Nm continuous at standstill, DSF encoder, and no brake, and confirm peak current and thermal limits with the selected drive to size fusing and cabling. Verify 22–23 kg mass and Class F insulation/IP65 for handling and enclosure design
What mounting and housing considerations matter in harsh environments?
The standard housing with IP65 protection resists dust and water jets; use appropriate gaskets and sealed connectors to maintain the rating. Avoid immersion and provide drainage/venting to control condensation.
For B2B production lines, where does this motor fit best?
It’s widely applied in CNC, packaging, and robotics where rapid contouring at ~3,000 rpm and precise feedback are needed; pair with matched Rexroth drives for tight path control. The compact 090 frame eases multi-axis retrofits on existing tooling.
How should I route power/feedback cables to minimize EMI and faults?
Keep power and encoder cables separated, use specified Rexroth cable sets and grounding, and avoid long parallel runs near high-noise feeders. Proper routing and shield bonding reduce encoder errors and nuisance trips.
What drive/controller compatibility should I plan for with digital servo feedback (DSF)?
This motor is intended for Rexroth digital drive controllers (e.g., DDS/DDC/DIAX families) using DSF; verify encoder protocol and cable sets match the drive. Using the correct DSF interface avoids following-error faults and simplifies commissioning.
Common Misspellings
MDD-090C-N-030-N2L-110PL0
MDD090C N 030 N2L 110PL0
MDD090C-N-030-N2L-110-PL0
MDD090C-N-030-N2L-110-PLO
MDD090C-N-030-N2L-110PLO
MDD090CN030N2L110PL0
MDD90C-N-030-N2L-110PL0
MDDO90C-N-030-N2L-110PL0
MDDO9OC-N-O3O-N2L-11OPLO
Internal Product Review
The MDD090C-N-030-N2L-110PL0 motor from Bosch Rexroth is a digital servo motor with 10.4 Nm continuous torque at standstill and a nominal speed of 3000 min⁻¹. It features a 110 mm centering diameter, keyway shaft, and digital servo feedback. This motor is widely used in CNC machines, robotics, and packaging systems.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD090C-N-030-N2L-110PL0.
Want to 
