MDD090C-N-030-N2L-130GR0
MDD Synchronous Motors
The MDD090C-N-030-N2L-130GR0 is a motor for digital drive controllers by Bosch Rexroth Indramat, part of the MDD Synchronous Motors series. It offers a continuous torque of 10.4 Nm at 3000 min⁻¹, features digital servo feedback (DSF), a plain shaft with shaft seal and 130 mm centering diameter, and is supplied without blocking brake.
Technical Specifications
Balancing
Standard
Holding Brake
Without blocking brake
Centering Diameter
130 mm
Housing
Standard
Motor Feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
10.4 Nm
Motor Length Code
C
Motor Size
090
Nominal Speed
3000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
Plain shaft
Connection Direction
Right
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
How does the motor’s inertia affect acceleration and dynamic response?
The rotor inertia is relatively moderate for a frame-090 motor; lower inertia is favorable for rapid acceleration, but it limits system stiffness under load.
What effects do ambient conditions beyond spec (temperature, altitude) have on performance?
In hotter or high-altitude environments, cooling is less effective and air density is lower, so the motor’s available torque and continuous rating must be derated per the MDD manual correction factors.
Can this motor be used in synchronized multi-axis systems reliably?
Yes — its digital servo feedback supports high contouring accuracy and coordinated motion, making it suitable for CNC, printing, and packaging synchronization.
What are the risks of adopting the 130 mm centering diameter version versus smaller ones?
The larger centering diameter gives more mounting rigidity but increases moment of inertia and may require more precise machining of the mounting plate.
What is the thermal behavior of this motor under continuous load?
The motor’s continuous 10.4 Nm torque is specified under the ambient limits (0–45 °C, <1000 m altitude) per the MDD planning manual, and outside that range torque must be derated.
Common Misspellings
MDD-090C-N-030-N2L-130GR0
MDD090C N 030 N2L 130GR0
MDD090C-N-030-N2L-130-GR0
MDD090C-N-030-N2L-130-GRO
MDD090C-N-030-N2L-130GRO
MDD090CN030N2L130GR0
MDD90C-N-030-N2L-130GR0
MDDO90C-N-030-N2L-130GR0
MDDO9OC-N-O3O-N2L-13OGRO
Internal Product Review
The MDD090C-N-030-N2L-130GR0 motor from Bosch Rexroth delivers 10.4 Nm continuous torque and runs at a nominal speed of 3000 min⁻¹. It includes digital servo feedback, a plain shaft, and a 130 mm centering diameter. This motor is commonly used in CNC machines, printing equipment, and packaging lines.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD090C-N-030-N2L-130GR0.
Want to 
