MDD090C-N-030-N2L-130PL2
MDD Synchronous Motors
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
11.0 Nm
Centering Diameter
130 mm
Housing
Standard
Motor Feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
10.4 Nm
Motor Length Code
C
Motor Size
090
Nominal Speed
3000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
keyway
Connection Direction
Left
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Output Shaft
Shaft With Keyway Per DIN 6885 sh. 1, 8-68 Edition
Frequently Asked Questions
What happens in a B2B automation line if this motor fails or goes out of spec?
Line stoppage, synchronization loss, or product quality defects (e.g. in printing or textile tension) can occur. Redundancy planning, spare modules, or hot-swap strategies are essential in high-uptime operations.
What is the dynamic impact of the motor’s “standard balancing” on vibration and high speed operation?
Standard balancing ensures minimal unbalance at rated speeds, which reduces vibration, bearing stress, and noise. For extreme high-speed applications or longer rotors, higher balance grades may be required.
What unique considerations apply to the Bosch Rexroth MDD090C-N-030-N2L-130PL2 product when selecting the drive amplifier?
The drive must support DSF (digital servo feedback) protocol and supply brake coil current control. It also needs to match the motor’s electrical parameters (voltage, current, inductance) and support safe brake disengagement sequencing.
What thermal considerations arise at 3000 rpm continuous operation?
Heat buildup in the windings and rotor can limit torque delivery or shorten life, so ambient cooling, ventilation, or forced cooling must be sufficient. In high ambient or confined installations, derating or additional cooling may be necessary.
How does digital servo feedback (DSF) influence closed-loop performance in this motor?
DSF provides high resolution and precise position/velocity feedback that reduces servo hunting and improves dynamic response. It also enables encoder-based diagnostics and error correction in the drive.
Common Misspellings
MDD-090C-N-030-N2L-130PL2
MDD090C N 030 N2L 130PL2
MDD090C-N-030-N2L-130-PL2
MDD090CN030N2L130PL2
MDD90C-N-030-N2L-130PL2
MDDO90C-N-030-N2L-130PL2
MDDO9OC-N-O3O-N2L-13OPL2
Internal Product Review
The MDD090C-N-030-N2L-130PL2 motor from Bosch Rexroth includes a keyway shaft, digital servo feedback, and an 11.0 Nm holding brake. It operates at 3000 rpm with a continuous torque of 10.4 Nm. This motor is commonly used in textile machinery, automated packaging lines, and industrial printing systems.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD090C-N-030-N2L-130PL2.
Want to 
