MDD090C-N-030-N2M-110GA2
MDD Synchronous Motors
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
11.0 Nm
Centering Diameter
110 mm
Housing
Standard
Encoder
Integrated multiturn absolute encoder
Motor feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
10.4 Nm
Motor Length Code
C
Motor Size
090
Nominal Speed
3000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
Plain shaft
Connection Direction
Side A
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
What thermal limitation should I watch for when running the MDD090C-N-030 at high duty cycles?
The motor’s continuous torque is constrained by heat buildup in its windings and housing, so under sustained high-load duty you must ensure sufficient cooling or forced convection to avoid thermal derating.
How does the built-in multiturn absolute encoder improve motion control stability?
The encoder retains absolute position across power cycles, avoiding homing routines and reducing cumulative drift in closed-loop control systems.
What impact does the 11 Nm blocking brake have on dynamic response and inertia?
The brake adds slight rotational inertia and may have a small drag torque when engaged, so system tuning must compensate during rapid start–stop cycles.
How critical is alignment with the 110 mm centering diameter in mounting?
Precise centering ensures minimal radial loading on bearings and reduces vibration—misalignment beyond a few hundred microns can degrade lifetime and accuracy.
What wiring or connector considerations must I account for with side-A connector integration?
Cable bend radius, electromagnetic shielding, and secure locking at side-A must be respected to prevent connector stress, noise injection, or loosening under vibration.
Common Misspellings
MDD-090C-N-030-N2M-110GA2
MDD090C N 030 N2M 110GA2
MDD090C-N-030-N2M-110-GA2
MDD090CN030N2M110GA2
MDD90C-N-030-N2M-110GA2
MDDO90C-N-030-N2M-110GA2
MDDO9OC-N-O3O-N2M-11OGA2
mdd090c-n-030-n2m-110ga2
Internal Product Review
The MDD090C-N-030-N2M-110GA2 motor from Bosch Rexroth is a digital servo motor with a nominal speed of 3000 min⁻¹ and 10.4 Nm continuous torque at standstill. It includes a blocking brake with 11.0 Nm torque and an integrated multiturn absolute encoder for accurate feedback. This motor is commonly used in CNC machines, packaging systems, and robotic automation.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD090C-N-030-N2M-110GA2.
Want to 
