MDD090C-N-030-N2M-110GB0
MDD Synchronous Motors
Technical Specifications
Balancing
Standard
Holding Brake
Without blocking brake
Centering Diameter
110 mm
Housing
Standard
Encoder
Integrated multiturn absolute encoder
Motor feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
10.4 Nm
Motor Length Code
C
Motor Size
090
Nominal Speed
3000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
Plain shaft
Connection Direction
Side B
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
What dynamic behavior can I expect at nominal 3000 min⁻¹ speed?
At full speed, the motor exhibits lower generated torque (due to back-EMF) and the current demand rises; the controller must maintain proper flux weakening or current limits to sustain performance.
What real-world constraints does having “no blocking brake” impose?
Without a holding brake, the shaft cannot be locked mechanically at standstill—thus, driven loads must not self-rotate under gravity or external torque when powered off.
Which drive controllers are recommended or compatible with this motor (naming manufacturer and product code)?
The Bosch Rexroth DDC / MDD series drives (e.g. DDC + MDD digital servo drives) are designed to interface with the MDD090C-N-030-N2M-110GB0, leveraging its DSF feedback.
What lifetime or reliability factors are most critical in B2B deployments of this motor?
Bearing load, thermal cycling, and alignment stresses drive reduced life, so systems should minimize radial loads and maintain ambient temperature within spec to ensure long mean time between failures.
How does the integrated multiturn absolute encoder impact system startup and homing?
The encoder retains absolute position across power cycles, so the controller can resume motion without a full rehoming routine (if configured properly).
Common Misspellings
MDD-090C-N-030-N2M-110GB0
MDD090C N 030 N2M 110GB0
MDD090C-N-030-N2M-110-GB0
MDD090C-N-030-N2M-110-GBO
MDD090C-N-030-N2M-110GBO
MDD090CN030N2M110GB0
MDD90C-N-030-N2M-110GB0
MDDO90C-N-030-N2M-110GB0
MDDO9OC-N-O3O-N2M-11OGBO
mdd090c-n-030-n2m-110gb0
Internal Product Review
The MDD090C-N-030-N2M-110GB0 motor from Bosch Rexroth offers 10.4 Nm continuous torque at standstill and runs at a nominal speed of 3000 min⁻¹. It includes a multiturn absolute encoder and a plain shaft with a shaft seal for reliable performance. This digital drive motor suits automation in packaging, printing, and CNC machining industries.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD090C-N-030-N2M-110GB0.
Want to 
