MDD093A-N-040-N2L-130PB1
MDD Synchronous Motors
The Bosch Rexroth Indramat MDD093A-N-040-N2L-130PB1 from the MDD Synchronous Motors series is a robust motor for digital drive controllers featuring a motor size of 093 and a centering diameter of 130 mm. It delivers a continuous torque at standstill of 9.2 Nm and integrates a holding brake with a blocking brake torque of 11 Nm. The standard housing and shaft seal ensure durability, while the keyway shaft type and standard (without side B shaft end) shaft end optimize mechanical connection. With a nominal speed of 4000 min⁻¹ and digital servo feedback (DSF), it offers precise control. Side B connector direction and standard balancing complete this high-performance package.
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
11 Nm
Centering Diameter
130 mm
Housing
Standard
Motor Feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
9.2 Nm
Motor Length Code
A
Motor Size
093
Nominal Speed
4000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
keyway
Connection Direction
Side B
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
Why is initial inspection critical?
Initial inspection is critical for identifying possible damage caused during storage and transport.
What is the motor centering diameter?
Centering diameter of the motor is 130 mm.
Which device controls and monitors MDD motors?
A drive controller monitors and controls MDD motors.
Are MDD motors suitable for dynamic applications?
MDD motors are designed for high dynamic performance with rapid acceleration and deceleration.
Does the motor use a single cable for power and feedback?
The motor uses separate cables for power and feedback.
Common Misspellings
MDD-093A-N-040-N2L-130PB1
MDD093A N 040 N2L 130PB1
MDD093A-N-040-N2L-130-PB1
MDD093AN040N2L130PB1
MDD93A-N-040-N2L-130PB1
MDDO93A-N-040-N2L-130PB1
MDDO93A-N-O4O-N2L-13OPB1
Internal Product Review
The MDD093A-N-040-N2L-130PB1 is a motor with IP65 rated power and feedback connections. Its shaft seal protects motor bearings from dust and liquids. Robust ingress protection allow use of the motor for applications that require operation in wet and dusty environments.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD093A-N-040-N2L-130PB1.
Want to 
