MDD093B-N-020-N2M-130PL2
MDD Synchronous Motors
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
22 Nm
Centering Diameter
130 mm
Housing
Standard
Encoder
Integrated multiturn absolute encoder
Motor feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
14.5 Nm
Motor Length Code
B
Motor Size
093
Nominal Speed
2000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
keyway
Connection Direction
Left
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
How does standard rotor balancing influence vibration and mechanical integrity during dynamic operation?
The standard balancing minimizes unbalance forces during rotation. This reduces noise and wear, improving long-term reliability in dynamic-axis assemblies.
What implications does winding inductance have on current loop tuning in high-speed applications?
With 7.6 mH winding inductance, this motor responds more slowly to rapid current changes. Current loop parameters must be adjusted to maintain control accuracy without overshoot.
How should drive systems be rated to handle short bursts of high-load conditions with the MDD093B-N-020-N2M-130PL2?
It reaches a peak current of 76.0 A under maximum load. Drives must tolerate this transient without triggering protection or degrading thermal stability.
What current draw should be expected during continuous standstill operation under rated load?
The motor draws 16.9 A of continuous current at standstill. This value defines steady-state load planning and affects the thermal sizing of the drive stage.
What motion behavior does the MDD093B-N-020-N2M-130PL2 deliver for moderate-speed servo axes?
Its nominal speed is 2000 min⁻¹, well-suited for precision tasks requiring consistent mid-range velocity. Speed stability supports smooth performance across varied load profiles.
Common Misspellings
MDD-093B-N-020-N2M-130PL2
MDD093B N 020 N2M 130PL2
MDD093B-N-020-N2M-130-PL2
MDD093BN020N2M130PL2
MDD93B-N-020-N2M-130PL2
MDDO93B-N-020-N2M-130PL2
MDDO93B-N-O2O-N2M-13OPL2
Internal Product Review
The model MDD093B-N-020-N2M-130PL2 from Bosch Rexroth Indramat is a synchronous motor. It offers 14.5 Nm continuous torque at standstill. It comes equipped with a multiturn absolute encoder and a blocking brake providing 22 Nm holding torque. The motor has a 130 mm centering diameter for precise alignment.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD093B-N-020-N2M-130PL2.
Want to 
