MDD093B-N-030-N2L-130GA0
MDD Synchronous Motors
The MDD093B-N-030-N2L-130GA0 is a motor for digital drive controllers by Bosch Rexroth Indramat, part of the MDD Synchronous Motors series. This size 093 motor with a centering diameter of 130 mm and plain shaft delivers a continuous torque at standstill of 14.5 Nm and runs at a nominal speed of 3000 min⁻¹. Featuring digital servo feedback (DSF), side A connector, standard balancing, shaft seal, and no blocking brake, it ensures reliable performance.
Technical Specifications
Balancing
Standard
Holding Brake
Without blocking brake
Centering Diameter
130 mm
Housing
Standard
Motor Feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
14.5 Nm
Motor Length Code
B
Motor Size
093
Nominal Speed
3000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
Plain shaft
Connection Direction
Side A
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
What motor feedback system is used on MDD093B-N-030-N2L-130GA0, and why is it beneficial?
It uses Digital Servo Feedback (DSF) for providing precise position/speed measurement and storing motor parameters for quick, safe commissioning. It enables accurate control and repeatable motion when paired with Indramat digital drives.
How does the plain shaft with shaft seal help in MDD093B-N-030-N2L-130GA0?
The plain shaft eases coupling to clamping hubs or sleeves for reducing backlash paths. Its integrated shaft seal limits ingress at the shaft interface to maintain consistent behavior in industrial environments.
Why is “continuous torque at standstill 14.5 Nm” important on MDD093B-N-030-N2L-130GA0?
It indicates the motor can deliver 14.5 Nm without overheating while holding or creeping is useful for indexing, clamping or low-speed contouring. Its steady torque supports accurate positioning in packaging and CNC setups.
What does the 130 mm centering diameter change during installation of MDD093B-N-030-N2L-130GA0?
The 130 mm pilot centers the motor precisely to the machine interface for shortening alignment time and improving coaxiality with the driven element. Its better centering can reduce runout and improve servo tuning.
How does “standard balancing” affect the MDD093B-N-030-N2L-130GA0 in high-speed motion?
The standard balancing reduces vibration at operating speed to improve surface finish and sensor readings in machine tools or converting lines. It lower vibration also helps bearings and couplings last longer.
Common Misspellings
MDD-093B-N-030-N2L-130GA0
MDD093B N 030 N2L 130GA0
MDD093B-N-030-N2L-130-GA0
MDD093B-N-030-N2L-130-GAO
MDD093B-N-030-N2L-130GAO
MDD093BN030N2L130GA0
MDD93B-N-030-N2L-130GA0
MDDO93B-N-030-N2L-130GA0
MDDO93B-N-O3O-N2L-13OGAO
mdd093b-n-030-n2l-130ga0
Internal Product Review
The Indramat’s Synchronous Motor MDD093B-N-030-N2L-130GA0 couples DSF feedback with a plain-shaft that has an embedded sealed interface and its connector is positioned ob side-A. It provides 14.5 Nm at standstill and 3000 min⁻¹ of operating speed. This unit comes in size 093/B-length that suits packaging cells, CNC axes and pick-and-place equipment, where as its 130 mm centering diameter and standard balance simplify alignment.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD093B-N-030-N2L-130GA0.
Want to 
