MDD093C-L-030-N2L-130GL1

MDD Synchronous Motors

Rated 4.8 stars (8 total reviews)

Call For Quote

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone

Part Number

+Add a message

Message

Request a Replacement

Request a Repair

Quote Both

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone:
1-888-551-3082

Email:
[email protected]

The MDD093C-L-030-N2L-130GL1 motor from Bosch Rexroth Indramat is part of the MDD Synchronous Motors series. It offers a nominal speed of 3000 min⁻¹, standard balancing, surface-cooled housing, and digital servo feedback with a 130 mm centering diameter. The motor includes an integrated blocking brake rated at 11 Nm and a shaft seal on a plain shaft. Connection is via a left-side connector.

Technical Specifications

Balancing
Standard

Holding Brake
With blocking brake

Holding Brake Torque
11 Nm

Centering Diameter
130 mm

Housing
Surface cooling

Motor Feedback
Digital servo feedback (DSF)

Motor Length Code
C

Motor Size
093

Nominal Speed
3000 min⁻¹

Shaft Seal
With shaft seal

Shaft Type
Plain shaft

Connection Direction
Left

Connection Type
Connector

Product Type
Motor for digital drive controllers

Shaft End
Standard (without side B shaft end)

Housing Design
For Surface Cooling With Motors Requiring A Bigger Power Connector With Housing Design N

Frequently Asked Questions

How does the centering diameter (130 mm) impact installation and torque transmission?

The centering diameter defines how the motor is mounted to mating parts (e.g. flange, coupling) and how loads are aligned. A correctly matched centering diameter in MDD093C-L-030-N2L-130GL motor ensures minimal misalignment, reducing vibration, bearing loads, and mechanical wear.

Why is “connector” type connection chosen over terminal box or direct wiring?

Connector‐type allows quicker, more reliable connections/disconnections, often with sealed plugs to aid in environmental protection. In the case of MDD093C-L-030-N2L-130GL motor connectors can simplify maintenance and reduce wiring errors, but require matching connector hardware and ensuring good sealing.

Why is digital servo feedback (DSF) used, and what difference does it make in control accuracy?

The DSF provides high-resolution information on rotor position and speed, allowing tight control loops with reduced error and quicker response. For MDD093C-L-030-N2L-130GL, it means better repeatability and smoother motion in precision tasks.

How does the “shaft seal” in this motor affect its lifespan and performance?

The shaft seal prevents dust, moisture, or contaminants from entering via the shaft, protecting internal bearings and rotor components. This reduces maintenance frequency and helps maintain efficiency over time, especially in harsher environments.

What benefit does the 11 Nm holding (blocking) brake provide in the MDD093C-L-030-N2L-130GL motor?

The holding brake ensures the shaft stays locked when power is removed, preventing drift or motion under load. It is especially useful for applications with vertical loads or where precise stoppage is required without continuous torque from the motor.

Common Misspellings

Internal Product Review

The MDD093C-L-030-N2L-130GL1 motor by Bosch Rexroth features a 130 mm centering diameter, plain shaft, and digital servo feedback for accurate control. It delivers 11 Nm holding brake torque and operates at a nominal speed of 3000 min⁻¹ with surface cooling. This motor suits CNC machines, robotics, and packaging systems.