MDD093C-L-030-N2L-130PL2
MDD Synchronous Motors
The Bosch Rexroth Indramat MDD093C-L-030-N2L-130PL2 from the MDD Synchronous Motors series is a high-performance Motor for digital drive controllers crafted for demanding automation environments. With a Motor Size of 093 and a nominal speed of 3000 min⁻¹, it ensures precise motion control. The unit features Digital servo feedback (DSF), a With blocking brake delivering a holding brake torque of 22 Nm, and a keyway shaft with integrated shaft seal. Its Housing Design for surface cooling with a larger power connector streamlines thermal management, and the left-side Connector interface provides reliable connectivity.
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
22 Nm
Centering Diameter
130 mm
Housing
Surface cooling
Motor Feedback
Digital servo feedback (DSF)
Motor Length Code
C
Motor Size
093
Nominal Speed
3000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
keyway
Connection Direction
Left
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Housing Design
For Surface Cooling With Motors Requiring A Bigger Power Connector With Housing Design N
Frequently Asked Questions
How does the blocking brake torque (22 Nm) affect vertical load applications?
The blocking brake torque of 22 Nm must exceed the gravitational torque of the vertical load to prevent drift when power is off. It ensures safety and position hold, especially in vertical shafts or lifting tasks.
How does the “keyway shaft” influence coupling and torque capacity of MDD093C-L-030-N2L-130PL2 motor?
The keyway provides a positive drive interface, minimizing relative slip between shaft and coupling. It supports transmitting higher torque loads reliably during dynamic acceleration/deceleration.
How does nominal speed of 3000 min⁻¹ influence harmonic distortion or drive selection?
Running at 3000 rpm means switching frequencies and motor inductance parameters must be matched carefully in the drive to avoid excessive heat or vibration. The drive must supply adequate current and handle reactive components to maintain efficiency.
In what ways does the centering diameter (130 mm) matter for mounting precision?
The centering diameter determines the fit on mating flanges or hub adapters, reducing run-out and misalignment. It ensures repeatable, precise alignment which is crucial for feedback accuracy in the MDD093C-L-030-N2L-130PL2 motor.
Why is digital servo feedback (DSF) preferred over encoder+resolver hybrids?
The DSF delivers faster, higher-resolution feedback which improves control loop bandwidth and reduces overshoot. For the MDD093C-L-030-N2L-130PL2, this means tighter speed/position accuracy in demanding automation.
Common Misspellings
MDD-093C-L-030-N2L-130PL2
MDD093C L 030 N2L 130PL2
MDD093C-L-030-N2L-130-PL2
MDD093CL030N2L130PL2
MDD93C-L-030-N2L-130PL2
MDDO93C-L-030-N2L-130PL2
MDDO93C-L-O3O-N2L-13OPL2
Internal Product Review
The MDD093C-L-030-N2L-130PL2 motor by Bosch Rexroth is built for digital drive controllers and includes a 22 Nm blocking brake and digital servo feedback. It features a 130 mm centering diameter, keyway shaft, and operates at 3000 min⁻¹ with surface cooling. This motor is ideal for use in robotics, packaging, and printing machinery.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD093C-L-030-N2L-130PL2.
Want to 
