MDD093C-L-030-N2M-110PL2
MDD Synchronous Motors
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
22 Nm
Centering Diameter
110 mm
Housing
Surface cooling
Encoder
Integrated multiturn absolute encoder
Motor feedback
Digital servo feedback (DSF)
Motor Length Code
C
Motor Size
093
Nominal Speed
3000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
keyway
Connection Direction
Left
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Housing Design
For Surface Cooling With Motors Requiring A Bigger Power Connector With Housing Design N
Frequently Asked Questions
How does the 22 Nm holding brake affect dynamic motion control?
The holding brake of MDD093C-L-030-N2M-110PL2 motor allows the shaft to be reliably locked when powered off, preventing drift under load. It also requires the drive to command a release pulse before motion, adding a small delay in startup.
Why is a centering diameter of 110 mm important in mounting?
A precise centering diameter ensures consistent alignment of the motor to gearboxes or flanges, reducing misalignment stress. It also aids in interchangeability in standardized mount patterns.
How does the “keyway” shaft type influence coupling choices of MDD093C-L-030-N2M-110PL2 motor?
Using a keyway in MDD093C-L-030-N2M-110PL2 motorallows positive torque transmission via keyed couplings or rigid hubs. It helps prevent slippage under torque peaks but requires precise machining of mating parts.
Why is the motor balanced as “Standard” and how does that matter?
Standard balancing keeps vibration acceptable for most applications, but very high-speed or vibration-sensitive systems may need “high-precision” balancing. Imbalance at high RPM can cause noise, wear, and bearing stress.
In what applications is the MDD093C-L-030-N2M-110PL2 motor well suited?
The MDD093C-L-030-N2M-110PL2 motor fits well in high-precision automation systems, robotics, or CNC stages where reliable braking and absolute position feedback are needed. Its design suits applications needing repeatable positioning even through power cycles.
Common Misspellings
MDD-093C-L-030-N2M-110PL2
MDD093C L 030 N2M 110PL2
MDD093C-L-030-N2M-110-PL2
MDD093CL030N2M110PL2
MDD93C-L-030-N2M-110PL2
MDDO93C-L-030-N2M-110PL2
MDDO93C-L-O3O-N2M-11OPL2
Internal Product Review
The MDD093C-L-030-N2M-110PL2 motor by Bosch Rexroth features a nominal speed of 3000 min⁻¹, a 22 Nm holding brake, and digital servo feedback with an integrated multiturn absolute encoder. Its surface-cooled housing, keyway shaft, and connector-based left-side connection make it suitable for demanding automation setups. This motor is widely used in robotics, packaging lines, and CNC machinery.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD093C-L-030-N2M-110PL2.
Want to 
