MDD093C-L-030-N2M-130GA0
MDD Synchronous Motors
The MDD093C-L-030-N2M-130GA0 is a motor for digital drive controllers from Bosch Rexroth Indramat's MDD Synchronous Motors series, featuring a plain shaft with a 130 mm centering diameter and a shaft seal. Operating at 3000 min⁻¹, it includes an integrated multiturn absolute encoder with digital servo feedback (DSF), a surface cooling housing, a connector without blocking brake.
Technical Specifications
Balancing
Standard
Holding Brake
Without blocking brake
Centering Diameter
130 mm
Housing
Surface cooling
Encoder
Integrated multiturn absolute encoder
Motor feedback
Digital servo feedback (DSF)
Motor Length Code
C
Motor Size
093
Nominal Speed
3000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
Plain shaft
Connection Direction
Side A
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Housing Design
For Surface Cooling With Motors Requiring A Bigger Power Connector With Housing Design N
Frequently Asked Questions
How does the shaft seal impact long-term performance?
The shaft seal prevents ingress of contaminants and moisture, protecting bearings and internal windings from failure. It also helps maintain insulation integrity and reduces maintenance frequency.
What installation orientation constraints are imposed by the centering diameter of 130 mm of MDD093C-L-030-N2M-130GA0 motor?
The 130 mm centering diameter of MDD093C-L-030-N2M-130GA0 motor demands matching mounting surfaces with sufficient precision to avoid misalignment. Any misfit or offset increases bearing loads and reduces lifetime.
How does the digital servo feedback (DSF) affect control loop performance of MDD093C-L-030-N2M-130GA0 motor?
The DSF gives high-resolution rotor position and velocity directly in the motor which enables tightly tuned, low latency control loops. This improves responsiveness and reduces tracking error in dynamic motion.
What is the impact of motor length code “C” on inertia and acceleration?
The Length code “C” increases rotor and housing size relative to shorter variants, raising rotational inertia. That slows acceleration and deceleration unless drive torque is increased.
In what applications is the MDD093C-L-030-N2M-130GA0 motor especially suited?
The MDD093C-L-030-N2M-130GA0 motor fits high-dynamic indexing, CNC machining centers, and packaging machines where precise positioning and high repetition are required. Its DSF + absolute encoder and favorable torque-inertia ratio support such uses.
Common Misspellings
MDD-093C-L-030-N2M-130GA0
MDD093C L 030 N2M 130GA0
MDD093C-L-030-N2M-130-GA0
MDD093C-L-030-N2M-130-GAO
MDD093C-L-030-N2M-130GAO
MDD093CL030N2M130GA0
MDD93C-L-030-N2M-130GA0
MDDO93C-L-030-N2M-130GA0
MDDO93C-L-O3O-N2M-13OGAO
Internal Product Review
The MDD093C-L-030-N2M-130GA0 motor from Bosch Rexroth features surface cooling, a 130 mm centering diameter, and a plain shaft with digital servo feedback. It includes an integrated multiturn absolute encoder and operates at a nominal speed of 3000 min⁻¹. This motor is suited for automation in packaging machinery, robotics, and semiconductor equipment.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD093C-L-030-N2M-130GA0.
Want to 
