MDD093C-L-030-N2M-130GA2
MDD Synchronous Motors
MDD093C-L-030-N2M-130GA2, Bosch Rexroth Indramat, MDD Synchronous Motors opens a new standard in precision motion with its digital servo architecture. The MDD093C-L-030-N2M-130GA2 features an integrated multiturn absolute Encoder and Digital servo feedback for closed-loop control. It is built on a Motor Size 093 frame with a Plain shaft 24 mm diameter output and comes equipped With blocking brake offering Holding Brake Torque of 22 Nm. Designed for robust industrial use, the unit supports natural convection cooling and optional surface cooling for enhanced thermal management.
Incorporating Standard Balancing, the motor adheres to strict dynamic performance requirements and maintains a Nominal Speed of 3000 min⁻¹ under rated conditions. The Centering Diameter of 130 mm and Housing design optimized for surface cooling ensure precise flange alignment and efficient heat dissipation. The encoder and feedback electronics are housed in a conformal sealed enclosure, complete with Shaft Seal to guard against contaminants. All power and signal connections are routed via a connector on Connection Direction Side A, simplifying cabling and reducing installation time.
Tailored for seamless integration with Bosch Rexroth drive controllers, this motor delivers reliable torque even in demanding cycles, thanks to its high-precision rotor inertia and consistent brake response. The modular design and standard mounting interface facilitate rapid replacement and predictive maintenance using digital diagnostics. Ideal for robotics, packaging, and CNC applications, the MDD093C-L-030-N2M-130GA2 offers exceptional uptime and precise positioning in complex automation systems.
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
22 Nm
Centering Diameter
130 mm
Housing
Surface cooling
Encoder
Integrated multiturn absolute encoder
Motor feedback
Digital servo feedback (DSF)
Motor Length Code
C
Motor Size
093
Nominal Speed
3000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
Plain shaft
Connection Direction
Side A
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Housing design
Standard
Frequently Asked Questions
How does the nominal speed of 3000 min⁻¹ influence inertia matching?
At 3000 rpm, the rotor’s inertia must be matched to the load’s inertia for stable response. Excess mismatch leads to sluggish acceleration or overshoot in high-speed motion profiles.
How would the MDD093C-L-030-N2M-130GA2 motor perform in packaging or material handling systems?
The precise control and integrated braking make it ideal for pick-and-place, indexing, and conveyor synchronisation in packaging lines. Its robust design suits continuous industrial duty.
What installation challenge arises from using the blocking brake torque (22 Nm)?
The brake may generate axial or radial forces when engaging; proper mechanical supports and mounting rigidity are needed. Also ensure the brake’s DC supply is stable to avoid release failure.
Why use a “plain shaft with shaft seal” instead of a keyed shaft in MDD093C-L-030-N2M-130GA2 motor?
A MDD093C-L-030-N2M-130GA2 motor's plain shaft with seal offers better sealing and reduced contamination ingress. It can still be adapted with clamping hubs or shrink fits, and the seal protects internals from dust or coolant.
What advantages does “Integrated multiturn absolute encoder (DSF)” bring to MDD093C-L-030-N2M-130GA2 motor?
The motor retains its absolute position across power cycles, reducing or eliminating the need for homing routines. This increases availability and simplifies motion recovery after interruptions.
Common Misspellings
MDD-093C-L-030-N2M-130GA2
MDD093C L 030 N2M 130GA2
MDD093C-L-030-N2M-130-GA2
MDD093CL030N2M130GA2
MDD93C-L-030-N2M-130GA2
MDDO93C-L-030-N2M-130GA2
MDDO93C-L-O3O-N2M-13OGA2
mdd093c-l-030-n2m-130ga2
Internal Product Review
The Bosch Rexroth Indramat MDD093C-L-030-N2M-130GA2 motor features a 24 mm plain shaft, a 22 Nm holding brake, and a multiturn absolute encoder with digital feedback for precise closed-loop control. Its 130 mm centering diameter and support for natural and surface cooling enhance performance in industrial automation. This motor is commonly used in CNC machinery, robotics, and packaging systems.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD093C-L-030-N2M-130GA2.
Want to 
