MDD093D-N-030-N2L-110GA0
MDD Synchronous Motors
The MDD093D-N-030-N2L-110GA0 from Bosch Rexroth Indramat features a motor length code D and a centering diameter of 110 mm. Part of the MDD Synchronous Motors, it provides a nominal speed of 3000 min⁻¹ and digital servo feedback. This AC servo motor is permanent-magnet with an encoder for commutation and rotor control.
It delivers 24.0 Nm continuous torque at standstill and uses a plain shaft with seal. It connects via Side A connector and has a standard housing. Without blocking brake, it suits digital drive controllers.
Technical Specifications
Balancing
Standard
Holding Brake
Without blocking brake
Centering Diameter
110 mm
Housing
Standard
Motor Feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
24.0 Nm
Motor Length Code
D
Motor Size
093
Nominal Speed
3000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
Plain shaft
Connection Direction
Side A
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
How does the MDD093D-N-030-N2L-110GA0 maintain shaft protection in high-particulate operating zones?
It features a plain shaft with seal. This prevents external contamination at the shaft interface, ensuring internal component longevity in dusty or humid environments.
What alignment considerations are required when integrating the MDD093D-N-030-N2L-110GA0 into compact mechanical frames?
A 110 mm centering diameter enables tight concentric alignment. This supports rigid mechanical coupling and improves system balance during continuous motion.
What mechanical limitation should be considered when vertical-axis holding is needed?
The MDD093D-N-030-N2L-110GA0 is designed without a blocking brake. Applications requiring static load holding must rely on external braking or torque control.
Which design element reduces mechanical noise and ensures smooth high-speed behavior in automated platforms?
Standard rotor balancing minimizes unbalanced forces during operation. This reduces vibration and ensures reliable performance across a wide dynamic range.
How does connector orientation affect cable layout strategy in this model?
It uses a side A connector configuration. This simplifies cabling along the drive-side path and reduces conflict in panel layouts or right-side component access.
Common Misspellings
MDD-093D-N-030-N2L-110GA0
MDD093D N 030 N2L 110GA0
MDD093D-N-030-N2L-110-GA0
MDD093D-N-030-N2L-110-GAO
MDD093D-N-030-N2L-110GAO
MDD093DN030N2L110GA0
MDD93D-N-030-N2L-110GA0
MDDO93D-N-030-N2L-110GA0
MDDO93D-N-O3O-N2L-11OGAO
Internal Product Review
The model MDD093D-N-030-N2L-110GA0 from the Bosch Rexroth Indramat MDD Synchronous Motors series is a compact powerhouse. It comes equipped with digital servo feedback, 110 mm centering diameter and a side A connector. A sealed plain shaft ensures smooth performance.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD093D-N-030-N2L-110GA0.
Want to 
