MDD093D-N-030-N2L-110GB1
MDD Synchronous Motors
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
11 Nm
Centering Diameter
110 mm
Housing
Standard
Motor Feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
24.0 Nm
Motor Length Code
D
Motor Size
093
Nominal Speed
3000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
Plain shaft
Connection Direction
Side B
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
What structural impact does the MDD093D-N-030-N2L-110GB1 have on vertical mounting or gantry load balancing?
It weighs 28.0 kg. This must be factored into mechanical supports, Z-axis load limits, and dynamic counterbalancing in overhead assemblies.
What thermal protection strategies are necessary during prolonged high-output operation of the MDD093D-N-030-N2L-110GB1?
It draws 24.0 Nm continuous torque at standstill. Heat buildup requires optimized cooling or derating in tightly enclosed installations.
How does the MDD093D-N-030-N2L-110GB1 behave under brief but extreme torque demands?
It can reach a peak current of 186.0 A. This supports high acceleration profiles but demands well-tuned current limiting and protective circuitry.
Which specification affects voltage drop and power efficiency during sustained load?
It has a windings resistance of 0.18 Ω at 20 °C. This influences resistive losses and must be considered when sizing drives and conductors.
How does rotor balance quality influence high-speed system dynamics?
The standard balancing minimizes vibration and bearing wear. The MDD093D-N-030-N2L-110GB1 runs smoothly in systems with tight mechanical tolerances and dynamic motion paths.
Common Misspellings
MDD-093D-N-030-N2L-110GB1
MDD093D N 030 N2L 110GB1
MDD093D-N-030-N2L-110-GB1
MDD093DN030N2L110GB1
MDD93D-N-030-N2L-110GB1
MDDO93D-N-030-N2L-110GB1
MDDO93D-N-O3O-N2L-11OGB1
Internal Product Review
The MDD093D-N-030-N2L-110GB1 servo motor from Bosch Rexroth deliver 24.0 Nm of continuous torque at standstill. It features digital servo feedback, a 110 mm centering diameter, a sealed plain shaft, and an 11 Nm holding brake. The side B connector ensures secure and efficient connectivity.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD093D-N-030-N2L-110GB1.
Want to 
