MDD093D-N-030-N2L-110GB2
MDD Synchronous Motors
The Bosch Rexroth Indramat MDD093D-N-030-N2L-110GB2 from the MDD Synchronous Motors series is a high-precision motor for digital drive controllers featuring a plain shaft with shaft seal and a centering diameter of 110 mm. With a continuous torque at standstill of 24.0 Nm and a blocking brake providing 22 Nm holding brake torque, it ensures reliable positioning. The motor incorporates digital servo feedback (DSF) for accurate control and runs at a nominal speed of 3000 min⁻¹. In a standard housing with standard balancing, this model uses a connector on Side B. Motor length code: D, motor size: 093.
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
22 Nm
Centering Diameter
110 mm
Housing
Standard
Motor Feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
24.0 Nm
Motor Length Code
D
Motor Size
093
Nominal Speed
3000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
Plain shaft
Connection Direction
Side B
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
How does the MDD093D-N-030-N2L-110GB2 enhance safety in vertical load-holding applications?
It integrates a 22 Nm blocking brake. This allows secure load retention during power-off, increasing reliability in suspended or lift-axis systems.
What installation benefit does the MDD093D-N-030-N2L-110GB2 offer for face-mount driven equipment?
It uses a centering diameter of 110 mm. This enables precise axial alignment for low runout in precision mounting scenarios.
How does this motor maintain shaft integrity in contaminated or humid production areas?
It features a plain shaft with a shaft seal. This protects internal components from ingress and supports longer service intervals.
What supports smooth electrical connection in rear-facing cabinet layouts?
The connector is positioned on Side B. The MDD093D-N-030-N2L-110GB2 simplifies routing when front or left-side access is obstructed.
What enables tight velocity control during coordinated multi-axis movement?
It incorporates digital servo feedback (DSF). This provides high-resolution velocity signals essential for synchronized control loops and dynamic correction.
Common Misspellings
MDD-093D-N-030-N2L-110GB2
MDD093D N 030 N2L 110GB2
MDD093D-N-030-N2L-110-GB2
MDD093DN030N2L110GB2
MDD93D-N-030-N2L-110GB2
MDDO93D-N-030-N2L-110GB2
MDDO93D-N-O3O-N2L-11OGB2
Internal Product Review
The MDD093D-N-030-N2L-110GB2 motor from Bosch Rexroth Indramat features a nominal speed of 3000 min⁻¹. It is built for high-precision digital drive control. It includes digital servo feedback, a 110 mm centering diameter, plain shaft with seal, and Side B connector. Its 22 Nm blocking brake ensures dependable load holding.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD093D-N-030-N2L-110GB2.
Want to 
