MDD093D-N-030-N2L-110PA1
MDD Synchronous Motors
The Bosch Rexroth Indramat MDD093D-N-030-N2L-110PA1 motor for digital drive controllers in the MDD Synchronous Motors series offers continuous torque at standstill of 24.0 Nm, a holding brake with 11 Nm torque, a 110 mm centering diameter, digital servo feedback (DSF) and a keyway shaft with shaft seal.
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
11 Nm
Centering Diameter
110 mm
Housing
Standard
Motor Feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
24.0 Nm
Motor Length Code
D
Motor Size
093
Nominal Speed
3000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
keyway
Connection Direction
Side A
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
How does the MDD093D-N-030-N2L-110PA1 handle extended thermal buildup during prolonged torque delivery?
It has a thermal time constant of 50 minutes. This allows for stable thermal behavior during sustained high-load duty cycles.
What motor characteristics are needed to support consistent torque at stall without overheating?
It draws 41.4 A continuous current at standstill. Proper thermal design ensures reliable holding without exceeding rated temperature thresholds.
How does the MDD093D-N-030-N2L-110PA1 enable smooth high-speed motion with short cycle times?
It operates at a nominal motor speed of 3000 min⁻¹. This supports rapid motion sequences in time-sensitive automation tasks.
Which specification directly supports accurate torque control in feedback-driven systems?
It features a torque constant of 0.61 Nm/A at 20 °C. The MDD093D-N-030-N2L-110PA1 enables precise torque output proportional to commanded current.
What shaft configuration simplifies axial drive integration in single-output systems?
It includes a standard shaft without side B end. This supports direct coupling to driven components without requiring dual-end access.
Common Misspellings
MDD-093D-N-030-N2L-110PA1
MDD093D N 030 N2L 110PA1
MDD093D-N-030-N2L-110-PA1
MDD093DN030N2L110PA1
MDD93D-N-030-N2L-110PA1
MDDO93D-N-030-N2L-110PA1
MDDO93D-N-O3O-N2L-11OPA1
Internal Product Review
The servo motor MDD093D-N-030-N2L-110PA1 from Bosch Rexroth Indramat features a 110 mm centering diameter for easy alignment in automation systems. It delivers 24.0 Nm standstill torque, supports digital servo feedback, and includes a sealed keyway shaft. Its 11 Nm holding brake ensures secure load retention during idle phases.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD093D-N-030-N2L-110PA1.
Want to 
