MDD093D-N-040-N2L-110PB2
MDD Synchronous Motors
The MDD093D-N-040-N2L-110PB2 from Bosch Rexroth Indramat features a centering diameter of 110 mm and a blocking brake torque of 22 Nm. Part of the MDD Synchronous Motors series, it delivers 24 Nm continuous torque and runs at 4000 min^-1. This motor uses digital servo feedback and standard balancing.
It uses a shaft keyway per DIN specification and incorporates a shaft seal for protection. The motor length code is D. A side B connector provides its electrical interface.
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
22 Nm
Centering Diameter
110 mm
Housing
Standard
Motor Feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
24.0 Nm
Motor Length Code
D
Motor Size
093
Nominal Speed
4000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
keyway
Connection Direction
Side B
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
What role does balancing (standard balancing) play in the motor’s vibration and long-term reliability?
Standard balancing reduces unbalance-induced vibration that would otherwise stress bearings and degrade precision.
Regarding the Bosch Rexroth Indramat MDD093D-N-040-N2L-110PB2, how should I integrate it into a CNC or robotic axis?
You should match the motor with a compatible Rexroth digital drive, set axis limit and torque parameters, and configure feedback gains.
How do you handle thermal management to avoid overheating during high duty cycles?
Ensure adequate cooling (convection, forced air, or liquid as allowed), proper venting, and avoid stacking components that block heat dissipation.
What are the implications of using digital servo feedback (DSF) for control loop tuning and homing?
DSF provides high-resolution feedback (including absolute position retention) which enables tighter control loops and better repeatability.
In what ambient conditions (temperature, altitude) will the motor’s torque performance need derating?
The specified torque is valid for ambient 0–45 °C and up to about 1000 m elevation; above these, you must apply load or derating factors from the manual
Common Misspellings
MDD-093D-N-040-N2L-110PB2
MDD093D N 040 N2L 110PB2
MDD093D-N-040-N2L-110-PB2
MDD093DN040N2L110PB2
MDD93D-N-040-N2L-110PB2
MDDO93D-N-040-N2L-110PB2
MDDO93D-N-O4O-N2L-11OPB2
Internal Product Review
The MDD093D-N-040-N2L-110PB2 motor by Bosch Rexroth delivers 24.0 Nm continuous torque at standstill and operates at a nominal speed of 4000 min⁻¹. It includes a 22 Nm holding brake, digital servo feedback, and a keyway shaft with side B connector configuration. This motor is ideal for use in CNC machines, printing systems, and robotic automation requiring reliable torque and speed control.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD093D-N-040-N2L-110PB2.
Want to 
