MDD093D-N-040-N2L-130GA1
MDD Synchronous Motors
The Bosch Rexroth Indramat MDD093D-N-040-N2L-130GA1 is a robust motor for digital drive controllers in the MDD Synchronous Motors series, delivering a continuous torque at standstill of 24.0 Nm and featuring a holding brake with 11 Nm blocking torque. Operating up to 4000 min−1, it incorporates digital servo feedback (DSF) for precise control.
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
11 Nm
Centering Diameter
130 mm
Housing
Standard
Motor Feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
24.0 Nm
Motor Length Code
D
Motor Size
093
Nominal Speed
4000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
Plain shaft
Connection Direction
Side A
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
What is the torque–speed behavior of this motor outside the standstill region?
As speed increases, allowable continuous torque typically falls due to thermal and voltage limits; the drive’s DC bus voltage and cooling method define the max usable torque at higher rpm.
How should this motor be mounted to minimize bearing stress?
Mount such that side A (floating bearing) absorbs radial loads and side B (fixed bearing) bears axial loads; also allow for thermal expansion of up to ~0.6 mm at side A to avoid axial over-constraint.
How to size the DC bus voltage and drive to support peak torque use cases?
The maximum torque (Mmax) you can achieve depends both on motor and drive pairing, and the DC bus voltage: lower voltage may reduce torque at higher speeds.
What installation constraints relate to cable connector orientation?
You must select the correct orientation (side A, side B, right, left) at order time—connector direction is not field-changeable after delivery.
What do the “MDD093D-N-040-N2L-130GA1” designation and “Bosch Rexroth Indramat” reveal about configuration?
This specific motor code indicates it’s from Bosch Rexroth Indramat’s MDD line (size 093, length variant “D”), with a 130 mm centering diameter, side-A connector style and digital servo feedback in the “GA1” build.
Common Misspellings
MDD-093D-N-040-N2L-130GA1
MDD093D N 040 N2L 130GA1
MDD093D-N-040-N2L-130-GA1
MDD093DN040N2L130GA1
MDD93D-N-040-N2L-130GA1
MDDO93D-N-040-N2L-130GA1
MDDO93D-N-O4O-N2L-13OGA1
Internal Product Review
The MDD093D-N-040-N2L-130GA1 motor from Bosch Rexroth includes a blocking brake with 11 Nm torque and digital servo feedback. It offers 24.0 Nm continuous torque at standstill and operates at 4000 min⁻¹. This motor is used in industries like robotics, CNC machining, and textile automation for accurate motion control.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD093D-N-040-N2L-130GA1.
Want to 
