MDD093D-N-040-N2L-130GB1
MDD Synchronous Motors
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
11 Nm
Centering Diameter
130 mm
Housing
Standard
Motor Feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
24.0 Nm
Motor Length Code
D
Motor Size
093
Nominal Speed
4000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
Plain shaft
Connection Direction
Side B
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
What happens to torque output when the motor is operated above its nominal 4000 min⁻¹ speed?
Above nominal speed, the available torque falls off roughly inversely with speed (power-limited region), so continuous torque cannot be maintained beyond 4000 min⁻¹.
How does including a holding brake (11 Nm) impact system design and safety?
The brake ensures failsafe holding under power loss, but you must account for its release time, power draw, and mechanical backlash in control tuning.
What are the practical implications of the 130 mm centering diameter?
It determines your coupling or flange design and alignment tolerances; deviations here produce undesired radial loads on bearings.
How should you size the drive’s current rating relative to the 24 Nm continuous stall torque?
The drive must deliver sufficient current at low speeds to produce that torque, plus a safety margin of ~20–30 % for transients or overloads.
What benefit does “digital servo feedback (DSF)” bring versus analog feedback?
DSF offers higher resolution, integrated parameter storage, and better noise immunity, reducing the need for external encoders.
Common Misspellings
MDD-093D-N-040-N2L-130GB1
MDD093D N 040 N2L 130GB1
MDD093D-N-040-N2L-130-GB1
MDD093DN040N2L130GB1
MDD93D-N-040-N2L-130GB1
MDDO93D-N-040-N2L-130GB1
MDDO93D-N-O4O-N2L-13OGB1
Internal Product Review
The MDD093D-N-040-N2L-130GB1 motor from Bosch Rexroth features a continuous stall torque of 24.0 Nm and a nominal speed of 4000 min⁻¹. It includes a blocking brake with 11 Nm holding torque, plain shaft, digital servo feedback, and side B connector. This motor is well-suited for use in robotics, packaging lines, and CNC machinery.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD093D-N-040-N2L-130GB1.
Want to 
