MDD093D-N-040-N2L-130PL1
MDD Synchronous Motors
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
11 Nm
Centering Diameter
130 mm
Housing
Standard
Motor Feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
24.0 Nm
Motor Length Code
D
Motor Size
093
Nominal Speed
4000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
keyway
Connection Direction
Left
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
What happens to position reference if power is removed and then reapplied?
With standard DSF (non-absolute) feedback, the motor loses its position reference when power is removed and must perform a homing routine after power-up.
How sensitive is this motor’s performance to flange or mounting stiffness?
Because servo motors rely on tight tolerances, a flexible mounting flange can cause vibration, misalignment, and position error; a rigid, low-compliance mounting is required to preserve accuracy and longevity.
What are the cooling implications when running this motor at 4000 min⁻¹?
Thermal management becomes critical: at high speeds, rotor losses and winding heating increase, so adequate airflow or external cooling must be provided to avoid thermal drift or demagnetization.
In what way does the left-side connector orientation impact cable routing?
The left-side connector dictates how you route power/feedback cables (relative to the machine frame); improper cable bending or strain near the connector can degrade feedback signals or mechanical sealing.
What mechanical considerations arise from the 130 mm centering diameter?
You’ll need a matching bearing housing or flange dimension to ensure proper structural alignment; misalignment at that diameter can induce bending moments on the shaft key.
Common Misspellings
MDD-093D-N-040-N2L-130PL1
MDD093D N 040 N2L 130PL1
MDD093D-N-040-N2L-130-PL1
MDD093DN040N2L130PL1
MDD93D-N-040-N2L-130PL1
MDDO93D-N-040-N2L-130PL1
MDDO93D-N-O4O-N2L-13OPL1
Internal Product Review
The MDD093D-N-040-N2L-130PL1 motor from Bosch Rexroth includes a keyway shaft, 11 Nm holding brake, and left-side connector. It operates at 4000 min⁻¹ nominal speed with 24.0 Nm continuous torque and digital servo feedback. This motor is commonly used in CNC systems, robotics, and packaging equipment.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD093D-N-040-N2L-130PL1.
Want to 
