MDD093D-N-040-N2M-110GB0
MDD Synchronous Motors
Technical Specifications
Balancing
Standard
Holding Brake
Without blocking brake
Centering Diameter
110 mm
Housing
Standard
Encoder
Integrated multiturn absolute encoder
Motor feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
24.0 Nm
Motor Length Code
D
Motor Size
093
Nominal Speed
4000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
Plain shaft
Connection Direction
Side B
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
What drive families are typically used with Bosch Rexroth Indramat MDD093D-N-040-N2M-110GB0?
MDD motors interface with Rexroth digital drive controllers such as DIAX04/DDS/DKS; verify firmware and feedback settings match DSF. Rexroth DIAX04 docs describe parameterization and EMC/grounding practices needed for stable operation.
What are the practical mounting considerations of the 110 mm centering (pilot) diameter?
The pilot aligns the frame to the machine interface; keep fit tolerances tight to control runout and vibration. Standard balancing on MDD motors assumes precise pilot engagement for smooth operation.
How should I approach cable routing with the Side-B connector orientation?
Plan harnesses so motor leads exit toward Side-B, avoiding tight bend radii and coupling interference; maintain separation from power lines. Follow drive EMC rules for shielding and grounding to minimize encoder noise.
What environmental rating concerns matter in washdown or dusty areas?
Ingress protection depends on the overall housing and sealing; shaft seals alone don’t define an IP rating and are a separate limitation. For harsh environments, combine correct seal care with enclosure/IP selection at the machine level.
How do I verify feedback compatibility when replacing another MDD093 variant (e.g., different winding or brake option)?
Match the digital servo feedback (DSF) type and encoder option first, then set the drive parameters to the new motor’s code. Rexroth documentation covers the DIAX04 parameter set used to align motor/feedback data.
Common Misspellings
MDD-093D-N-040-N2M-110GB0
MDD093D N 040 N2M 110GB0
MDD093D-N-040-N2M-110-GB0
MDD093D-N-040-N2M-110-GBO
MDD093D-N-040-N2M-110GBO
MDD093DN040N2M110GB0
MDD93D-N-040-N2M-110GB0
MDDO93D-N-040-N2M-110GB0
MDDO93D-N-O4O-N2M-11OGBO
Internal Product Review
The Bosch Rexroth MDD093D-N-040-N2M-110GB0 motor features a plain shaft, shaft seal, and integrated multiturn absolute encoder for digital servo feedback. It offers 24.0 Nm continuous torque at standstill with a nominal speed of 4000 min⁻¹. This motor is used in robotics, CNC automation, and industrial packaging systems.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD093D-N-040-N2M-110GB0.
Want to 
