MDD093D-N-040-N2M-110GL1
MDD Synchronous Motors
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
11 Nm
Centering Diameter
110 mm
Housing
Standard
Encoder
Integrated multiturn absolute encoder
Motor feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
24.0 Nm
Motor Length Code
D
Motor Size
093
Nominal Speed
4000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
Plain shaft
Connection Direction
Left
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
How would you calculate thermal limits or duty cycles given the continuous torque rating?
Use motor datasheet’s thermal time constant and ambient cooling assumptions; the continuous torque value is valid under rated temperature, and overloads must be limited in duration to avoid overheating.
What installation concerns arise from “connector” type connection and “left” orientation?
Cable routing must avoid interference, ensure minimal strain on wires, and accommodate the left connector orientation in compact layouts to prevent stress on connection points.
How does the motor’s nominal speed of 4000 min⁻¹ constrain mechanical transmission design?
The designer must ensure couplings, belts, or gears can operate safely near that speed, and avoid resonance zones or critical speed issues in shafts or linkages.
What should a system designer consider when integrating the 11 Nm holding brake in dynamic motion?
The brake torque must exceed torque transients during stops but open quickly enough to not limit acceleration; also, consider brake response time and heat dissipation in cyclic duty.
What impact does 24 Nm continuous torque at standstill have on machine load design?
It means heavy loads or torque disturbances at zero speed can be held without slipping, reducing the need for oversized gearing or external locking mechanisms in many applications.
Common Misspellings
MDD-093D-N-040-N2M-110GL1
MDD093D N 040 N2M 110GL1
MDD093D-N-040-N2M-110-GL1
MDD093DN040N2M110GL1
MDD93D-N-040-N2M-110GL1
MDDO93D-N-040-N2M-110GL1
MDDO93D-N-O4O-N2M-11OGL1
Internal Product Review
The MDD093D-N-040-N2M-110GL1 motor by Bosch Rexroth delivers 24.0 Nm continuous torque and operates at 4000 min⁻¹ with a plain shaft and integrated shaft seal. It features a digital servo feedback system and a multiturn absolute encoder for precise positioning. This motor is well-suited for use in robotics, CNC machines, and packaging systems.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD093D-N-040-N2M-110GL1.
Want to 
