MDD093D-N-040-N2M-130GR2
MDD Synchronous Motors
The MDD093D-N-040-N2M-130GR2 from Bosch Rexroth Indramat features an integrated multiturn absolute encoder and digital servo feedback (DSF). Part of the MDD Synchronous Motors series, it delivers a continuous torque at standstill of 24.0 Nm and a holding brake torque of 22 Nm. This 093-size motor has a centering diameter of 130 mm and a standard housing.
It has a plain shaft and connector. The brake ensures secure stops. Code D suits digital drives.
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
22 Nm
Centering Diameter
130 mm
Housing
Standard
Encoder
Integrated multiturn absolute encoder
Motor feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
24.0 Nm
Motor Length Code
D
Motor Size
093
Nominal Speed
4000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
Plain shaft
Connection Direction
Right
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
What is the benefit of having a multiturn absolute encoder built into this motor?
It preserves absolute rotor position across power cycles—so on reboot the drive instantly knows the rotor angle and doesn’t need a homing move. This reduces downtime and enhances repeatability in precision systems.
How does the 24 Nm standstill torque affect selection for inertial loads?
It means the motor can resist external torques up to 24 Nm without rotating, which helps for static holding of loads or against disturbances—but dynamic acceleration must still stay within torque-speed curve limits.
Given it’s a “Code D digital drive motor,” what feedback and commutation requirements should the drive support?
The drive must accept Digital Servo Feedback (DSF) protocol and interpret the multiturn absolute encoder data for commutation, speed, and position control—older analog drives won’t be compatible.
How will ambient temperature and cooling affect continuous rating in real use?
The motor’s permissible temperature and cooling environment directly constrain continuous torque output—derating may be required for elevated ambient or limited airflow, so plan heat dissipation or forced cooling.
In what kind of B2B or industrial automation setups is this motor especially suitable?
It’s ideal for robotics, packaging, or indexing systems where precise motion, fast settling, and reliable hold are needed—especially where initialization speed matters due to the absolute encoder.
Common Misspellings
MDD-093D-N-040-N2M-130GR2
MDD093D N 040 N2M 130GR2
MDD093D-N-040-N2M-130-GR2
MDD093DN040N2M130GR2
MDD93D-N-040-N2M-130GR2
MDDO93D-N-040-N2M-130GR2
MDDO93D-N-O4O-N2M-13OGR2
Internal Product Review
The MDD093D-N-040-N2M-130GR2 motor by Bosch Rexroth integrates a multiturn absolute encoder with DSF feedback and delivers 24.0 Nm torque at standstill. With a 130 mm centering diameter, plain shaft seal, and nominal speed of 4000 min⁻¹, it ensures precise operation. This motor is widely applied in packaging lines, robotics, and industrial automation.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD093D-N-040-N2M-130GR2.
Want to 
