MDD095B-N-030-N2M-110PA0
MDD Synchronous Motors
The Bosch Rexroth Indramat MDD095B-N-030-N2M-110PA0 is a high-performance synchronous AC servo motor in the MDD Synchronous Motors series. It delivers 45.1 Nm maximum torque at 3000 min⁻¹ nominal speed, features Digital servo feedback (DSF), a shaft seal, 110 mm centering diameter, Side A connection, 29 x 10⁻⁴ kgm² rotor inertia and operates in 0 to +45 °C environments.
Technical Specifications
Balancing
Standard
Holding Brake
Without blocking brake
Centering Diameter
110 mm
Housing
Standard
Motor feedback
Digital servo feedback (DSF)
Motor Length Code
B
Nominal Speed
3000 min⁻¹
Shaft Seal
With shaft seal
Connection Direction
Side A
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Rotor Moment Of Inertia
29 x 10-4 kgm2
Thermal Time Constant
50 (45) min
Peak Current
108.2 A
Permissible Ambient Temperature
0 to +45 °C
Continuous Current At Standstill
24.1 (33.2) A
Maximum Torque
45.1 Nm
Frequently Asked Questions
How does MDD095B-N-030-N2M-110PA0 maintain steady operation during overload peaks?
The motor supports transient current peaks up to 108.2 A. This enables temporary torque boosts without system instability.
Why is the motor length code B design efficient in MDD095B-N-030-N2M-110PA0?
It optimizes coil geometry for compact torque output. This achieves balance between power density and form factor.
How does the design minimize wear in continuous-duty cycles?
The motor uses sealed components for contamination protection. This prevents abrasive ingress and extends bearing service intervals.
Why does this servo achieve consistent current flow during acceleration?
The motor integrates controlled inductance at 8.2 mH equivalent. This stabilizes current ramp-up and smoothens acceleration transitions.
How does MDD095B-N-030-N2M-110PA0 improve control loop responsiveness?
The motor reduces feedback latency through digital signal transmission. This enhances servo accuracy during fast positional corrections.
Internal Product Review
The MDD095B-N-030-N2M-110PA0 synchronous motor from Bosch Rexroth operates at 3000 min⁻¹ with side A connection and a 110 mm centering diameter. It includes a shaft seal and digital feedback for smooth control. This model is often used in precision machining and assembly applications.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD095B-N-030-N2M-110PA0.
Want to 
