MDD112C-N-015-N2L-130GA2
MDD Synchronous Motors
The MDD112C-N-015-N2L-130GA2 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed to pair with the company’s digital drive controllers, the unit converts electrical commands into controlled rotational motion for axis drives in industrial automation.
At stall the motor delivers a continuous torque of 28.0 Nm, allowing stable holding force without overheating during closed-loop positioning. Its nominal speed is rated at 1500 min⁻¹, matching drive systems that operate on standard 50/60 Hz inverter outputs. Mounting is centered on a 130 mm pilot diameter so the frame aligns accurately with machine housings. A built-in blocking brake supplies 40.0 Nm of static torque to secure vertical or suspended loads when power is removed. Position and velocity data are returned through digital servo feedback, enabling the controller to correct deviation in real time. Together these parameters define the electromechanical performance envelope required for medium-inertia production axes.
Electrical and signal leads exit on Side A through a keyed connector, simplifying installation in cabinets where space behind the motor is limited. The rotor is balanced to the standard grade and the housing is the standard sealed version; a shaft seal prevents coolant or oil ingress around the plain output spindle. The drive end is a plain shaft with no auxiliary shaft on side B, and the interface follows motor size 112 with length code C for compatibility with existing Rexroth mounting kits. A connector-based wiring scheme complements the product’s classification as a motor for digital drive controllers, completing the package for applications that demand repeatable torque under cyclic duty.
Technical Specifications
Balancing
Standard
Centering Diameter
130 mm
Connection Direction
Side A
Connection Type
Connector
Continuous Torque at Standstill
28.0 Nm
Holding Brake
With blocking brake
Holding Brake Torque
40.0 Nm
Housing
Standard
Motor Feedback
Digital servo feedback (DSF)
Motor Length Code
C
Motor Size
112
Nominal Speed
1500 min⁻¹
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Shaft Seal
With shaft seal
Shaft Type
Plain shaft
Common Misspellings
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD112C-N-015-N2L-130GA2. 
Want to 
