MDD112C-N-030-N2M-180GA2

MDD Synchronous Motors

In Stock, Ships 2-3 Days

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Or speak to a sales representative for additional information:

Phone:
1-888-551-3082

Email:
[email protected]

The MDD112C-N-030-N2M-180GA2 is a digital servo motor designed by Bosch Rexroth. It boasts a motor frame size classified with the code 112, and motor frame length identified by the C code. Key features include an integrated multiturn absolute encoder, providing digital servo feedback. This measures motor speed and position, transmitting this crucial information to the drive controller via a feedback cable. Power is supplied via a cable connected to the power connector located on side A of the motor's housing. The servo motor has a sealed, dustproof (IP65 rated) housing, protecting against contact with high-voltage and moving parts, in line with DIN 40050 guidelines. The housing allows for both natural convection and surface cooling. The operational parameters of this servo motor are influenced by the selected cooling method: Low motor loads benefit from natural convection, and high loads suit surface cooling. This motor operates optimally in temperature ranges between 0 and 40 degrees Celsius and altitudes from 0 to 1000 meters. This motor has a plain main shaft and an integrated blocking brake with a rated hold of 40 Nm. The servo motor should not be used in conditions over 55 degrees Celsius or above a 5000-meter altitude. The motor's nominal speed is at 3000 RPM.