1-888-551-3082 | 1-919-443-0207 | [email protected]

MDD Synchronous Motors | Indramat Motors

MDD112D-N-015-N2M-130GA3

  Call For Quote
Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Request a Quote


Request a Repair


Or speak to a sales representative for additional information:

Description

The MDD112D-N-015-N2M-130GA3 is a Bosch MDD motor with a speed rate of 1500 RPM. Suitable for natural convection or surface cooling, it includes an integrated blocking brake for safety, preventing shaft movement until a 24 Volt DC electrical release signal is initiated. This brake, weighing approximately 3.5 kilograms, delivers 60 Nm of holding torque and draws 1.35 Amps of current, with release and clamping delays of 150 and 30 milliseconds respectively. The motor housing is IP65 rated for total dust protection and resistance against low-pressure liquid jets from any direction. The unit's output shaft is a plain type and hosts an integrated encoder for tracking motor speed and position for the drive controller. The motor dimensions include a 193 millimeter motor flange, 14 millimeter mounting hole diameter and a length of 587 millimeters inclusive of the holding brake according to DIN 42948, with a 130mm centering diameter. Trained personnel should install and operate this motor using only approved accessories. The feedback connector must be separately ordered, and the one-year warranty product is globally shippable from Indramat USA.

Motor Type: MDD Motor
Rated RPM: 1500
Cooling System: Natural Convection/Surface Cooling
Safety Feature: Integrated Blocking Brake
Brake Release Signal: 24 Volts DC
Brake Current: 1.35 Amps
Holding Torque: 60 Nm
Brake Release Delay: 150 milliseconds
Brake Clamping Delay: 30 milliseconds
Brake Weight: 3.5 kilograms
Motor Power Connector Location: Side A of Housing
Protection Rating: IP65
Output Shaft: Plain Shaft
Feedback Mechanism: Integrated Encoder
Installation and Operation: Trained Personnel
Motor Mounting: Mounting holes on the motor flange
Motor Flange Size: 193 millimeters
Mounting Hole Diameter: 14 millimeters
Motor Flange Compliance: DIN 42948
Centering Diameter: 130 millimeters
Motor Length (with holding brake): 587 millimeters
Accessory: Feedback connector (to be ordered separately)
Shipping: Global

MDD112DN015N2M130GA3
MDD112D N 015 N2M 130GA3
mdd112d-n-015-n2m-130ga3
Shipping & Payment Options
DHL-logo FexEd-logo UPS-logo freight-icon

AmEx-icon Mastercard-icon Visa-icon wire-transfer-icon
Warranty
1-year-warranty
Indramat USA 1 Year Warranty
Repair
We offer a repair service for the MDD112D-N-015-N2M-130GA3.
Indramat Is Trusted By
motion-industries-logo
3m-logo
IBM-logo
GexPro-logo
caterpillar-logo
nasa-logo
ford-logo
vallen-logo