The MDD115B-N-015-N2L-130GA1 is a highly dynamic, digital AC servomotor developed by Bosch Rexroth. Sporting a compact, power-dense design, this servomotor exhibits a high power-to-weight ratio with a size code of 115. The unit is pre-loaded with long-lasting, lubricated bearings and operates optimally under weatherproof conditions. It is essential to ensure correct stranding and interchange of connections to averting drive controller malfunctions. The servomotor must be used below 5000m above sea level and is compatible only with manufacturer-approved power and feedback cables (max 75m in length). The device uses a circular connector for feedback, electronic commutation, and it's excitable via permanent magnets. The maximum current rating stands at 121.9A. Caution must be taken to avoid shaft damage from heavy loads or impacts. For installation, the unit includes two tapped holes for lifting screw insertions. Additionally, daily steam cleaning may cause the housing coat to peel. During transit and storage, the motor must remain dry. It comes with a backup support valid for one year from Indramat USA. The motor can be shipped globally, aided by reliable logistics agents.
Power and Feedback Cable Length: 75m Ideal Use: Highly dynamic applications Size Code: 115 Potential Failures: Incorrectly stranded or interchanged connections Power-to-Weight Ratio: High Max Installation Elevation: 5000m over sea level Weatherproofed conditions: Stationary mode as per Class 3M1 Housing: Peels with frequent steam cleaning Lifting Screws: Two tapped holes on housing Motor Power Connectors: Spigot nuts Potential Damage: Impacts and heavy loads on the shaft Speed: Based on torque requirements of its application Maximum Current Rating: 121.9A Transportation: Chain tackles Storage Requirements: Dry Feedback Connection: Circular connector Commutation: Electronic Excitation: Permanent magnets Housing: Completely sealed Shipment: Via trustworthy logistics agents
MDD115BN015N2L130GA1 MDD115B N 015 N2L 130GA1 mdd115b-n-015-n2l-130ga1