MDD115D-F-020-N2L-130GA0
MDD Synchronous Motors
The Bosch Rexroth Indramat MDD115D-F-020-N2L-130GA0 synchronous motor from the MDD Synchronous Motors series delivers precision motion control for demanding applications. This Motor for digital drive controllers features digital servo feedback (DSF) for closed-loop performance, ensuring rapid response and tight position tolerance. Built into a Standard housing design, it integrates directly with Rexroth Indramat controllers for streamlined commissioning. Its compact form factor and robust construction support continuous industrial operation without compromise.
Featuring a Continuous Torque at Standstill of 57.0 Nm, the MDD115D-F-020-N2L-130GA0 sustains high static loads, while a nominal speed of 2000 min⁻¹ enables swift dynamic transitions. The Centering Diameter of 130 mm and Motor Size 115 ensure compatibility with standardized mounting systems, and the Motor Length Code D provides a balanced length-to-torque ratio. A Plain shaft with With shaft seal protects internal bearings from contamination, and the Without blocking brake configuration reduces inertia for rapid reversals. Factory-balanced to Standard tolerance, this unit minimizes vibration and noise, and the side-A Connection Direction with a sealed Connector interface simplifies cabling.
Designed for seamless integration, this motor’s DSF feedback and connectorized power link accelerate installation and diagnostics. The robust shaft seal and standard housing design guarantee long-term reliability, even under continuous operation. Ideal for packaging, handling, and assembly machines, the MDD115D-F-020-N2L-130GA0 enhances system uptime and performance in high-precision industrial drives.
Technical Specifications
Balancing
Standard
Holding Brake
Without blocking brake
Centering Diameter
130 mm
Motor Feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
57.0 Nm
Motor Length Code
D
Motor Size
115
Nominal Speed
2000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
Plain shaft
Connection Direction
Side A
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Housing Design
Standard
Frequently Asked Questions
Why is the nominal speed of 2000 min⁻¹ practical in multi-axis packaging and printing lines?
It provides a balanced envelope for torque reserve and velocity loop bandwidth for aiding register control and cut-to-length tasks. Its coordinated drive achieve smooth cam profiles without saturating current limits during frequent speed inversions.
What mounting and alignment considerations arise from the 130 mm centering diameter on MDD115D-F-020-N2L-130GA0?
The standardized pilot ensures coaxial alignment with gearheads or belt pulleys for improving vibration behavior. It also eases field replacement across MDD115D variants where concentricity and repeatable fit are critical to encoder accuracy.
How does the plain shaft with shaft seal improve life in particulate environments? (MDD115D-F-020-N2L-130GA0)
The sealing lip mitigates ingress toward the front bearing under washdown spray or dust. It preserves bearing preload characteristics and maintains consistent radial runout for the feedback model.
How does connector direction (Side-A) affect cabinet and cable routing for MDD115D-F-020-N2L-130GA0?
Its side-A orientation shortens cable loops on many gantry/column layouts for lowering capacitance and mechanical stress. Its connector pinouts and cable lengths preserve signal integrity over extended runs.
What drive/controller pairings are appropriate for the MDD115D-F-020-N2L-130GA0?
The Indramat digital drives (e.g., DDC/DKS families) are documented for DSF-equipped MDD motors for ensuring correct commutation and protection. Its approved combinations in configuration sheets should be followed to guarantee thermal and electrical compatibility.
Common Misspellings
MDD115DF020N2L130GA0
MDD115D F 020 N2L 130GA0
mdd115d-f-020-n2l-130ga0
Internal Product Review
Bosch Rexroth Indramat produces the servo motor MDD115D-F-020-N2L-130GA0 for closed-loop positioning with a 2000 min⁻¹ rated speed and DSF feedback. It comes with 130 mm of centering diameter, a plain shaft with seal, no brake and side-A connector. It is widely used in packaging, machine-tool, printing and handling systems that seeks precise servo coordination.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD115D-F-020-N2L-130GA0.
Want to 
