MDD115D-N-015-N2L-130PA2
MDD Synchronous Motors
The MDD115D-N-015-N2L-130PA2 from Bosch Rexroth Indramat has a 130 mm centering diameter and 57 Nm standstill torque. Part of the MDD Synchronous Motors, it delivers 1500 min⁻¹ speed and 60 Nm brake torque with digital servo feedback. It features standard balancing, housing and a shaft keyway for reliability.
A shaft seal and side A connector provide protection and simple installation. Length code D denotes its compact size. It is made for digital drive controllers with a standard shaft end.
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
60.0 Nm
Centering Diameter
130 mm
Housing
Standard
Motor Feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
57.0 Nm
Motor Length Code
D
Motor Size
115
Nominal Speed
1500 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
keyway
Connection Direction
Side A
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
Why is a 130 mm centering diameter relevant for machine alignment and bearing load distribution?
It helps concentric mounting for reducing shaft misalignment and bearing side-loads under cyclic torque. It improves lifecycle of lifetime-lubricated bearings and maintains encoder geometry for sustaining repeatable accuracy across duty cycles.
What application domains best leverage the 57 Nm standstill torque and 1,500 min⁻¹ nominal speed of MDD115D-N-015-N2L-130PA2?
These values suit indexers, unwind/rewind axes and axis drives in packaging, printing, textile webs, robotic handling and tool feeds requiring steady holding with controlled ramping. Its torque/speed pairing supports consistent throughput and registration.
How does the keyed shaft with shaft seal on MDD115D-N-015-N2L-130PA2 aid coupling reliability and ingress protection?
It ensures torque transmission without slip under repeated reversals, while the seal limits lubricant washout and particle ingress at the front end. It stabilizes backlash behavior and reduce maintenance interventions.
What is the role of the 60 Nm blocking/holding brake in MDD115D-N-015-N2L-130PA2 during E-stop and vertical-axis retention?
The electrically released brake generates static torque to hold gravity or process loads during power loss for preventing drift. It supports safe stops in Z-axes, loaders and turret stations until drives regain control.
How does standard balancing and housing affect vibration behavior and spectral content on MDD115D-N-015-N2L-130PA2?
The standard balancing limits unbalance, curbing excitation at fundamental and harmonic frequencies, which protects bearings and encoder. Its standard sealed housing maintains stiffness and thermal paths for predictable dynamic response under motion profiles.
Common Misspellings
MDD115DN015N2L130PA2
MDD115D N 015 N2L 130PA2
mdd115d-n-015-n2l-130pa2
Internal Product Review
The Rexroth Indramat’s MDD115D-N-015-N2L-130PA2 synchronous servo motor integrates DSF feedback, a keyed shaft with seal and a 60 Nm blocking brake. It is designed in a length D frame with 130 mm centering to suit compact spaces. The unit's 1,500 min⁻¹ speed and 57 Nm standstill torque makes it fit into packaging, printing, tooling, robotics and handling lines.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD115D-N-015-N2L-130PA2.
Want to 
